Re: adding Samsung ML2251-NP printer to a wireless network

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Well, I've done as described but it's not working. I hope by just
adding the IP address in the printer properties, it's indeed static
(and not DHCP). Any suggestions?

Suz
Jack (MVP-Networking). wrote:
Hi
I am Not familiar with the Samsung per se.
However some printers that are Network capable would not install correctly
if you ignore their software.
I.e., if you do not go through the installation motions, you might have
diffeliculties in configuring the printer and its Network capacity
correctly. Some Network printers depends on more than the pure driver to
print correctly through the Network.
Jack (MVP-Networking).

"pelican" <pelicanmedia@xxxxxxxxxxx> wrote in message
news:1162314381.388443.178840@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I'm tring to add a Samsung ML2251-NP printer to a wireless network. It
has an ethernet port, and we're buying a wireless router (which one?),
so that our small office of six can all access it wirelessly.
We're clueless how to set this up. Any kind souls want to set us on the
path to setting this up?

Suz


.

Relevant Pages

  • Re: WMCE Wireless Communication Setup Problem
    ... I'm not a network wiz ... wouldn't operate with the wireless router DHCP enabled and the clients set up ... I've solved my WMCE communication problem. ... > Your wireless router should be getting its public IP address from your modem ...
    (microsoft.public.windows.mediacenter)
  • Re: dhcp issue
    ... > reasons including the way our network is setup I dont want this to happen. ... > Instead I want the wireless router to assign a DHCP address from its pool. ... > DHCP is enabled on the router, but for some reason the SBS DHCP server is ...
    (microsoft.public.windows.server.sbs)
  • Re: dhcprelay troubleshooting, where next?
    ... Means jack never receives a DHCP_OFFER:( ... Not sure if this is enough to make mrsdoyle "quit" in midstream or not. ... Which will carry just the DHCP packets, ... When dealing with network troubles, it is best if at _all_ possible, to ...
    (comp.os.linux.networking)
  • Re: Really weird networking problem
    ... there is already a client computer, so a new network jack was installed. ... I got the "Network cable is unplugged" message. ... Tried to change settings on the card, but nothing worked, so we got a second ...
    (microsoft.public.windowsxp.network_web)
  • Network printer setup question
    ... I have a small home network, set up using a 3 Com wireless router as a DHCP ... of DHCP clients but this isn't showing the two HP printers which I've ...
    (comp.periphs.printers)