Re: 1394 Net Adapter Cannot Start (Error Code 10)

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

In news:7C686971-9C34-49F3-94B4-EEFA43B4DA84@xxxxxxxxxxxxx,
Crushed Pickle Studio <crushedpickle(nospam)@sasktel.net> typed:
Good morning:

I have just recently built a new PC with the following Specs:

2 - AMD Opteron 265
Tyan Tiger K8WE Motherboard (w/onboard 1394)
2 GB Corsair Ram
nVidia 6600 PCIe Graphics Card
WinXP Pro SP2

My issue lies in the fact that in the Device Manager under Network
Adapters there is the yellow "information" indicator telling me that
there is some sort of problem.

What is it complaining about specifically?

There have been a number of us that
have built the exact same machine (down to the letter) and it appears
that all others are working so far. Aside from XP sp2, the only
other installed drivers are the nVidia Platform driver v6.70, and the
nVidia Graphics drivers v81.98. To my knowledge the other machines
that have been built have not applied any hotfixes or anything...just
the bare SP2 install.

The onboard 1394 is enabled in the BIOS and the Fireware Adapter
shows no conflicts. There are no IRQ conflicts.

All indications show that it should be working, however, in the
Control Panel under Network Connections, I only see my Ethernet
Connection. Should I be seeing a connection for my 1394 card as
well?

Yes, but do you actually need this at all?
Have you looked at the mobo mfr's website for drivers?


I did come across a MS KB article (KB317812) that spoke to
this, but I'm unsure if this is the same issue or even related.

I look forward to a reply...hopefully the MS staff or other users can
shed some light on this. My advance thanks to any and all that
respond.

Regards,
Jeff Michel
Crushed Pickle Studio
Estevan, SK, Canada



.

Relevant Pages

  • Re: organizing drivers and tools into the platform builder tree
    ... Public only gets built on during Build and Sysgen, ... Another interesting point are platform independant drivers, ... public tree or 3rdparty ...
    (microsoft.public.windowsce.platbuilder)
  • Re: 1920s wiring....
    ... tree residences since then two of which we ... built and wired ourselves. ... inside the connection space of baseboard electric heaters) and we have ... The ones used in "proper" fittings are robust ...
    (alt.home.repair)
  • Re: MSI RS482M4-ILD (Radeon Xpress 200 chipset)
    ... nice on paper as it is m-ATX and has built in graphics with DVI out. ... all computers that I have built before has had intel motherboard ... I would not recomend this card to anyone else. ... will work better in a few years when drivers have matured. ...
    (comp.os.linux.hardware)
  • Re: Rye-Oyster Bay Br--sister Bridge?
    ... NYC wasn't built for drivers. ... It should have been built for drivers. ... waiting for a train stinks. ...
    (misc.transport.road)
  • Re: Cisco Pix UDP Built
    ... If shows only the connections FROM foreign address TO local one ... (as Cisco says) ... outbound UDP built(all links for pix are here ... when a UDP connection is started to foreign address faddr using the global ...
    (Security-Basics)