Re: "Add Network Place" from command line ?

David Welch wrote:
Ok, I can add newtwork places in WindowsExplorer through the GUI and the
Wizard.

But is there a command line command for adding Network places as well?

Assume I want to add the remote shared folder

\\192.168.1.30\mylogs

as a new entry below "My Network Places" and label it "remotelogs".
How do I this from command line ?

David

net use \\192.168.1.30\mylogs

--
Steve Parry BA(Hons) MCP

http://www.gwynfryn.co.uk


.

Relevant Pages

  • Re: Dial-up clients drop connections
    ... Both products physically synchronize with the respondent modem, authenticate, attempt to "talk to the network", then drop the connection. ... Extreme cases may warrant the removal of the TCP/IP protocol..With the NetShell utility, you can reset the TCP/IP stack to restore it to its state that existed when the operating system was installed. ... When you run the reset command, it rewrites pertinent registry keys that are used by the Internet Protocol stack to reach the same result as the removal and the reinstallation of the protocol. ...
    (microsoft.public.windowsxp.general)
  • Re: networking problem
    ... > Static IP address configuration in Windows XPe environment HOWTO ... > To be able to be pingable with one ethernet card in your target machine, ... > Network Command Shell ... > Command Shell Interface Context ...
    (microsoft.public.windowsxp.embedded)
  • RE: Network Not Working in Linux ; Works in Windows Why ?
    ... Have you enabled the NIC cards and/or do you have the correct drivers loaded ... Network Not Working in Linux; ... I am giving the outputs of the following command for assitance. ...
    (RedHat)
  • internet ip to local ip with pix
    ... pix inside 10.112.2.241 ... Is 10.2.2.2 inside or outside the network? ... You would need a 'static' command, and you would need a 'route' ... to the outside interface by using the access-group command. ...
    (comp.dcom.sys.cisco)
  • Re: trace ip
    ... will hack your through a network they hacked into from another network... ... >Ascend digital modem box, his last attack I logged he ... >authentication and is being logged into our RAD logs. ... It is all command ...
    (microsoft.public.security)