Checking Duplex mode?

From: "Conan Kelly" <CTBarbarin@xxxxxxx>
Date: Fri, 25 Aug 2006 22:34:05 GMT

Hello all,

Is there any way to check my NIC's duplex mode (Full-Duplex or Half-Duplex) from Windows.

If not, what other ways can I determine which one it is using?

--
Thanks for any help anyone can provide,

Conan Kelly

.

Follow-Ups:
- Re: Checking Duplex mode?
  - From: Chuck

Prev by Date: Re: Network UNC vs Mapped Drive
Next by Date: Adsl connection problems at startup
Previous by thread: Losing Internet access after setting up a home network
Next by thread: Re: Checking Duplex mode?
Index(es):
- Date
- Thread

Relevant Pages

Re: Checking Duplex mode?
... Is there any way to check my NIC's duplex mode (Full-Duplex or Half-Duplex) from Windows. ... Under Local Area Connection - Properties, Configure - Advanced tab, you may have ...
(microsoft.public.windowsxp.network_web)
Re: Checking Duplex mode?
... Is there any way to check my NIC's duplex mode (Full-Duplex or Half-Duplex) from Windows. ... the lights on the switch just show a live connection and not necessarily the speed or duplex mode. ...
(microsoft.public.windowsxp.network_web)
Re: half-duplex
... I don't know any reason why one of the ethernet ports becomes half-duplex. ... You might also try connecting em1 to the same switch port as em2 as ... Is there any way I can "reset" it to full-duplex and 1000baseT without ... When both sides of the link are set to autoneg, ...
(comp.unix.bsd.freebsd.misc)
Re: half-duplex
... I don't know any reason why one of the ethernet ports becomes half-duplex. ... You might also try connecting em1 to the same switch port as em2 as ... Is there any way I can "reset" it to full-duplex and 1000baseT without close down the network connection on em1? ... When both sides of the link are set to autoneg, ...
(comp.unix.bsd.freebsd.misc)
Re: em driver worse then fxp driver ... why?
... > I've tried in bth half and full duplex mode .. ... > climbs, half-duplex, Collisions climb ... ... half-duplex mode: that's the nature of the beast. ... I'd also try swapping a cable plugged into a working fxp box with the ...
(freebsd-net)