Re: Any known issues withsp2 and non-sp xp ics?

The config in the previous post was for the host installed with modem: Client
for ms networks, file and printer sharing, tcp/ip. Bridge: Local area
connection,1394 connection.

The config for the client is: On the Client side i have: lac5 connected(nic)
Properties are: General: status-connected, sent-some, received-none.
Support: Adr type: Automatic private address, ip
address:yes, subnet mask:255.255.0.0, default gateway: none.
error msg: cant renew ip address.
I have client for ms networks enabled and internet protocol(tcp/ip) enabled:
obtain automaic all.

Thanks.

"mtnk" wrote:

Well currently i got a
1394 Connection-disabled,bridged,
Local Area Connection,Enabled,bridged(NIC),
Local Area Connection4,Enabled,Shared(Cable-Modem),
and network bridge15,enabled.
Host works fine, properties of NIC: General: Connected, Support: all
unavailable.
properties of lac4:General:
Connected(sent/received:yes), Support: assigned by dhcp,ip address:yes,
subnet mask:255.255.255.0,gateway:yes.
properties of bridge: General:connected,
sent:some,received:none, Support: addr type: Automatic Private address,ip
address:yes , subnet mask:255.255.0.0 , gateway:none.
error msg: "couldnt renew ip address for network bridge."
What do ya say, seems something is blocking the connection..

Thanks.
M.

"Steve Winograd [MVP]" wrote:

In article <8C3FDCF1-B852-461C-AB5D-18B936AB52E4@xxxxxxxxxxxxx>, mtnk
<mtnk@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hello all
Any known issues with a xpsp2 client and non-spxp host networking/ics?

Thanks.
M.

Sorry, but I don't know what "non-spxp" means. A computer running XP
SP2 should network fine with an ICS host running Windows 98SE, Me,
2000, or any version of XP. Does that answer your question?

Are you having issues?

Thanks for that Steve,
what i meant was just a pc running xp without any service pack.
yes i'm having issues..thanks..
After updating the client with sp2.I have tried a lot of the things
mentioned here and else where. Commandline options to reset etc.Uninstalling
all protocols on both and installing again.I have disabled 1394 atm.
I have cable internet with cross-over connection to other pc.Host is
connected via usb with modem.NAV06 and xp firewalss are disabled.
Should i upgrade host aswell with sp2?Dont wanna loose connection on that
but..What could be missing?
Thanks.
M.

You're welcome, M. I would certainly upgrade the host with SP2, even
if there were no issues. An XP computer without any service packs has
dozens of security vulnerabilities that the service packs have fixed.

I'm sorry, but I don't know what issues you're having, so I can't say
how to fix them. You've told us what you tried that didn't fix them,
but I don't see a description of what's actually wrong. If you'll
give details, including what works, what doesn't work, and the
complete text of all error messages, I'm sure that someone can help.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

.

Relevant Pages

  • Re: server disconnection - very often
    ... Often get the redirected folders working offline prompt on some client ... VMware virtual network interface cause network issue. ... On the Connection Type page, click Broadband, and then click Next. ... |> re-initialize the offline files cache and database on client computers: ...
    (microsoft.public.windows.server.sbs)
  • Re: Do I Have A Firewalled LAN Run By ISP In Between?
    ... from that host while at host ... running a layer within a layer, with a complex network address translation ... application called "Internet Connection Sharing". ... what those packets are for, ...
    (comp.security.firewalls)
  • Re: server disconnection - very often
    ... Reason of permanent popups is VMware server aplication on clients. ... Run CEICW to configure the network of SBS: ... Two network adapters - manual router connection to broadband ... Uninstall VMware on client. ...
    (microsoft.public.windows.server.sbs)
  • Re: Lan Wifi Network
    ... >knowledge of computer network... ... a wireless user has gone away. ... client software to do the job. ... connection which can be timed. ...
    (alt.internet.wireless)
  • Re: Remote Client Configuration
    ... the client computer to the SBS domain via connect computer wizard remotely. ... local network or via dial up VPN connection, you will use an local copy on ... connection is established, Group Policy is not applied during logon. ...
    (microsoft.public.windows.server.sbs)