Re: Assigning Static IP Address Help

assuming the router IP is 192.168.0.1, you may assign 192.168.0.2, mask 255.255.255.0 and default gateway 192.168.0.1 and DNS 192.168.0.1.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"shaoen01" <shaoen01@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:C5A7AFCA-6C50-4F63-A1F5-1A14E562BC69@xxxxxxxxxxxxxxxx
Hi,

I am using a D-link DSL-G604T router and it is unable to assign static ip
address to specific mac addresses. At least i do not think it has that
function. I tried assigning static ip address for my computer through network
connections> LAN connection>TCP/IP

What values should i put for the subnet mask, DNS and gateway? I tried
pointing it to my router, i could conenct to the router but not to the
internet. My computer may be connected to more than 1 network sometimes.

So if i assign a static ip address, would this affect me logging into
another network? I read that i could set an alternate configuration for
static ip address, but what if i am connecting to a network which i know
nothing about. For example, i connect to my own home network and school
network as well.

I am also sure that the ip i am assigning is outside the range of DHCP. I
would like to assign static ip address is because my network places is unable
to update the computers on my workgroup.

And not allowing me to access another computer's files. But when i entered
the ip address of that computer, i can access it right away. However, the ip
address may change and so i am considering setting up static ip address.

Suggestions anyone? Thanks

Relevant Pages

  • Re: Unable to obtain a server- assigned IP address Try again later or enter an IP address in Net
    ... I can go to Control Panel - Network and Internet Connections - ... If yours is not a subset of your router, ... I have a LINKSYS router (4 port connection) - I have my cable modem ...
    (microsoft.public.pocketpc)
  • Re: Boot-up question on SBS2K3
    ... > The router separates you from the Internet. ... > network. ... >>>> 2 Nics, broadband cable modem connected into the external NIC, ...
    (microsoft.public.windows.server.sbs)
  • Re: Need help closing security holes in my Windows XP home system!
    ... >>new portals of access to internet hackers, ... My router came with a default MAC address printed on the bottom. ... > your unique hardware as in your segment of the network - no other device ... > Apply ALL MS Office Updates ...
    (comp.security.firewalls)
  • Re: Open access point for clients
    ... Boss wants clients to have access to internet ... If you knew enough to get the network setup like it is already then you ought to know how to do this. ... If you can't get a second ip then connect one router to your isp and then connect wan ports of two additional routers to lan side of ISP connected router. ...
    (alt.internet.wireless)
  • RE: Small network with lots of features, questions
    ... Your network sounds overly complicated to me. ... to get to the internet. ... To do that, without using your server as a router, you need ...
    (microsoft.public.windows.server.networking)
Loading