telnet

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: "Jack Gostl" <gostl@xxxxxxxxxxxxx>
Date: Sat, 24 Jun 2006 22:30:44 -0400

When I telnet into my Windows XP Pro system I can't see my shared folders.
My setup is as follows:

Machine A (Windows) has a folder. The folder is shared with the Workgroup.

Machine B (Windows) accesses the shared the folder as drive S:. When logging
into Machine B, and opening a command prompt the drive is visible and
available.

Machine C (Unix) logs into machine B via telnet. The "S:" drive isn't there.
Doing a
"net use" from inside the telnet session shows the shares correctly, but
shows them as unavailable.

I'm not really sure how to proceed. I ran this by the "windowsxppro.general"
group and no one had the answer.

BTW: I'm doing this because various bueraucratic and security restrictions
will only allow telnet type access through our firewalls.

Any thoughts

.

Follow-Ups:
- Re: telnet
  - From: Malke

Prev by Date: Re: Invalid IP Address - Automatic Private Address
Next by Date: Network 2 internet PC's and printer
Previous by thread: Re: What Is IP Routing? And how do I get my own external IP?
Next by thread: Re: telnet
Index(es):
- Date
- Thread

Relevant Pages

Re: language support
... trying to setup Thai support. ... Now you should be able to easily locate the I386 folder in Windows ... > Associate Expert - WindowsXP Expert Zone ...
(microsoft.public.windowsxp.basics)
Re: Installing old Windows XP on a Dell Inspiron Mini?
... The problem is that Windows XP has no ability to be installed from USB ... You can at least get started with setup because the BIOS will provide ... Format and prepare the hard disk using FDISK and FORMAT to do it. ... Copy the contents of the i386 folder to a folder on the hard drive. ...
(alt.sys.pc-clone.dell)
Re: How to install a new OS on laptop.
... If he wants a totally clean setup, he could make the hard drive DOS bootable on another PC, and copy the I386 folder to the hard drive. ... Then run the file 'setup' from within windows 98. ... The advantage of the former is that if any driver files are required from the installation CD, they will be automagically found on the hard disk otherwise you have to find the CD. ...
(comp.sys.laptops)
Re: Office 2007 Beta Setup Error
... I'm assuming that Office 2002 and Office 2007 are sharing the same Windows boot partition but that the target for the main install ... from the download into a CD 'image' structure see if these steps help. ... (assuming you saved to a 'downloads' folder and created a new folder named Off2007ProB2CD1) the Start=>Run line would look ... or if you wish first copy the new folder and its contents to a CD and run Setup from there. ...
(microsoft.public.office.misc)
Re: Toshiba S100 Problem With RAID Driver
... Add RAID drivers and Service Pack 2 to your original Windows CD! ... Windows XP setup CD ... Our next objective is to extract Service Pack 2 to a folder so we can ...
(comp.sys.laptops)