Re: More Peer 2 Peer Troubles
- From: "Robert L [MS-MVP]" <noreply@xxxxxxxxxxx>
- Date: Tue, 25 Apr 2006 08:14:38 -0500
You should not use two default gateway in the ICS host. remove the default gateway from inside NIC.
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
"David" <dcterrill@xxxxxxxxxxx> wrote in message news:%23kLTjzEaGHA.5000@xxxxxxxxxxxxxxxxxxxxxxx
Problems with a peer to peer network (With New Note Apr 25th)
I have used my machines in P2P for a long time, using various IP's between
them all without problem. Only the Host has been connected to the internet,
this is the way I wanted it for security. This has been fine, but now I have
tried unsuccessfully for quite a while to interconnect the Client(s) to the
internet so as to directly link with the internet mainly just to register
new software with MS.
I have tried a number of methods, quite a number. The main setup is an
incoming splitter lifts off the voice circuit from the ADSL modem router
(SpeedTouch 536), the ADSL feed into it's own NIC on the host. Then a 2nd
NIC connects to a switch to stream down to clients. Kerio does not give ANY
trouble as a firewall.
This is all fine except that now I would like to access the internet from
all machines, not just the host. The usual setup has not used ICS on the
host, nor have I used "bridge mode", well that is until now when I have
tried various configs including these setups. Need I say that I have used
both static and dynamic cons, DHCP, no DHCP etc, ICS up, bridge mode etc.
Platform: All machines XP Pro etc
Host: Two NIC's, one set to Incoming modem, TCP/IP 10.0.0.1/255.0.0.0, the
NIC hardware address IP set 10.0.0.1.
2nd NIC set to TCP/IP 192.168.0.1 /255.255.255.0 NIC hardware IP
192.168.0.1/255.255.255.0.
All machines set as "MSHOME" workgroup
In TCP/Adv/Wins NetBios is set over TCP/IP
If I set the TCP/IP manually then I also set the DNS to the local ISP.
New note Apr 25th
IPCONFIG /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : boris
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : qld.bigpond.net.au
Ethernet adapter Home Net:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast
Ethernet NIC
Physical Address. . . . . . . . . : 4C-00-10-20-0F-BD
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.0.0.138
DNS Servers . . . . . . . . . . . : 10.0.0.138
Ethernet adapter Bigpond:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : SiS 900-Based PCI Fast Ethernet
Adapter
Physical Address. . . . . . . . . : 00-01-6C-A9-AA-C3
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.0.0.1
Subnet Mask . . . . . . . . . . . : 255.0.0.0
Default Gateway . . . . . . . . . : 10.0.0.138
DNS Servers . . . . . . . . . . . : 10.0.0.138
I hope someone out there has the time to wade thru the above. It seems to me
that simply put the prob is in the multihomed (host) machine with one NIC
not talking to the second NIC. You will have noted that I have moded the
Registry HKLM...EnableRouter (now) 1
Many thanks
Dave
- References:
- More Peer 2 Peer Troubles
- From: David
- More Peer 2 Peer Troubles
- Prev by Date: Re: sharing two internet connection
- Next by Date: Re: Help with error msg when joining to a 2000 Domain
- Previous by thread: More Peer 2 Peer Troubles
- Next by thread: Re: More Peer 2 Peer Troubles
- Index(es):
Relevant Pages
|
