Re: Internet Connection Speed
- From: "Steve Winograd [MVP]" <bcmaven@xxxxxxxx>
- Date: Thu, 20 Apr 2006 16:39:44 -0600
In article <91A32589-59A1-4C60-BD06-47E60E682A63@xxxxxxxxxxxxx>, James
<James@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Windows XP Home with a home network installed and working...however my
network adapter (I have only one) connects to the Internet at 10 mbps rather
than 100. The connection in Network Connections uses "Internet Gateway" which
is separate from my LAN connection and runs at 100 mbps. Drivers and Windows
are up to date. Is it normal to connect to the Internet at only 10 mbps?
The Internet Gateway is your broadband router. The speed reported for
your LAN connection is the maximum rated speed of its connection to
the router. I'd expect that to be100 mbps for any recent network card
and router. These tips might let you increase the speed:
1. Look at the network adapter properties in Device Manager. If it's
explicitly configured for 10 mbps, try changing it to 100 mbps or to
automatic. I've written a web page with details:
Windows XP Network Troubleshooting - Problems with Network Cards
http://www.practicallynetworked.com/sharing/troubleshoot/networkcard.htm
2. Make sure that then network cable is properly wired and connected.
3. Connect to a different router port.
The fastest cable modem speeds that I've seen are just over 7 mbps, so
a 10 mbps connection is adequate for now.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)
Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.
Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
.
- Prev by Date: Re: Logging into XP Account over home network
- Next by Date: Re: Can not use network shares on Server 2003 standard edition wit
- Previous by thread: new computer
- Next by thread: Re: Approach to use cross-over connect as part of LAN
- Index(es):
Relevant Pages
|
Loading
