Re: Can't connect to Internet, NIC seems to work fine

Hi

In General, you can debug the Network Settings of a computer by following
these steps.
Step One. Check the Network parameters in the Computer's Device Manager.
Make sure that the Network Card drivers are installed correctly; i.e. there
is No IRQ conflict, and No Ghost installation.
http://www.ezlan.net/faq#ghost
Step Two Verify Basic network setting in the OS:
http://www.ezlan.net/Installing#verify If the above two Steps indicates that
every thing looks good but functionally it does not work.
Step Three. Check (and repair if necessary) the Socket Layers, Winsock, and
or refresh the TCP/IP Stack. http://www.ezlan.net/clean#refreshnet
If need to Reinstall; Log to this page it have a lot of links to
instructions for Windows Network
Installation -http://www.ezlan.net/Installing.html
Jack (MVP-Networking).

"R. J. Salvi" <rjsalvi@xxxxxxxxxxxxxxxxxxxxx> wrote in message
news:TWd_f.290$543.53@xxxxxxxxxxxxxxxxxxxxxxx
Specs:
NIC: Intel Pro1000 MT
Drivers: latest Intel (10.3)
Mobo: ASUS P5LP-LE (HP box) with latest BIOS
OS's: MCE 2005 SP2, XP Pro SP2, XP Pro 64bit SP2...all fresh installs

Symptom: tries to open web page -- "opening web page" in status bar --
then page times out after a few minutes

What works: ping & tracert by both name and IP address and Intel's NIC
diagnostics shows no problems

What's been tried:
- different cables (CAT5 and CAT5e)
- bypass router and wire NIC directly to cable modem
- different router ports
- different PCI slots for NIC

What's not been tried:
- NIC in different PC
- check MTU settings in registry

Any suggestions are appreciated. Thx.
--
Robert J. Salvi, Ambiance Acoustics
http://www.ambianceacoustics.com
San Diego, CA USA
(858) 485-7514



.

Relevant Pages

  • Re: Visual Studio - Debug - Launch Application
    ... Microsoft Loopback the connection is created with only the Virtual Machine ... Network Services option checked. ... Configuration, and in 2005 there are network settings, but in Visual Studio ...
    (microsoft.public.dotnet.framework.compactframework)
  • Re: GPO Restrictions applying the Local Administrators
    ... The network settings I mean locking down ... > Ward - ... > you want to allow certain people to install certain software on certain ...
    (microsoft.public.windows.group_policy)
  • Re: XP Home Ed Network Problems
    ... I had the exact same problem and the exact same ipfconfig results. ... One is to manually configure your network settings by ... I then re-installed IPv6 and all the problems came back. ...
    (microsoft.public.windowsxp.network_web)
  • Re: 2 PCs over ETHERNET (why so difficult)
    ... both running XP pro and having ethernet adapters. ... >network settings every which way...nothing. ... when I try to look into the working group I created I ...
    (microsoft.public.windowsxp.general)
  • Re: Assigning names to machines local XP network.
    ... I have been experimenting a little bit with my network settings ... TCP/IP menus (eg. DNS on the machine vs DNS on the gateway,. ... To understand the need for NetBT, you have to start by understanding the OSI ...
    (microsoft.public.windowsxp.network_web)
Loading