Re: Internet Sharing

On Fri, 31 Mar 2006 22:41:01 -0800, Kurt <Kurt@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:



"Chuck" wrote:

On Fri, 31 Mar 2006 19:48:02 -0800, Kurt <Kurt@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

"Chuck" wrote:

On Thu, 30 Mar 2006 23:25:01 -0800, Kurt <Kurt@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

If all computers are connected to the host computer and the clients are
seeing the internet connection in the gateway is their something else I need
to do to browse the Web

Kurt,

If all of the computers are successfully connected to each other, then you
simply run the Network Setup Wizard on each. On the ICS host, you select:
This computer connects directly to the Internet. The other computers on my
network connect to the Internet through this computer.
<http://nitecruzr.blogspot.com/2005/05/using-network-setup-wizard-in-windows.html#ICSHost>
http://nitecruzr.blogspot.com/2005/05/using-network-setup-wizard-in-windows.html#ICSHost

On the ICS clients, you select:
This computer connects to the Internet through another computer on my network or
through a residential gateway.
<http://nitecruzr.blogspot.com/2005/05/using-network-setup-wizard-in-windows.html#NATClient>
http://nitecruzr.blogspot.com/2005/05/using-network-setup-wizard-in-windows.html#NATClient

If running the wizard on the clients is a problem, just set each client to use
DHCP for IP and DNS settings.

Chuck

I tried that but it still does not work. I can control the host internet
connection from the client but when I open up the internet browser it is like
it goes to open then then it doesn't. I have manually configured the IP
Adress on each computer with the host being 192.168.0.1 the clients above
that any other ideas

Thanks Kurt

Kurt,

Well, as you've discovered, if ICS isn't working, manually configuring is a
waste of time. You're going to have to figure out why ICS isn't working.

Anyway, the NSW is a baseline procedure. Now let's see what we can find out.
Start with my troubleshooting guide, and check all network components and
services. Particularly "Windows Firewall / ICS" (or "ICF / ICS") service.
<http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#Components>
http://nitecruzr.blogspot.com/2005/05/troubleshooting-network-neighborhood.html#Components

And Kurt, please type your answers after mine - it will benefit both of us.
Help us to help you.
<http://nitecruzr.blogspot.com/2005/05/how-to-post-on-usenet-and-encourage.html#TopPosting>
http://nitecruzr.blogspot.com/2005/05/how-to-post-on-usenet-and-encourage.html#TopPosting

Chuck

This is on a clent computer

Windows IP Configuration

Host Name . . . . . . . . . . . . : KLRLAPTOP
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed

IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . : Intel(R) PRO/Wireless 2915ABG Network
Connection
Physical Address. . . . . . . . . : 00-13-CE-01-55-C5

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . : Marvell Yukon 88E8036 PCI-E Fast Ethernet
Controller #3
Physical Address. . . . . . . . . : 00-E0-91-0A-09-BF
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

PPP adapter bigpond:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
Physical Address. . . . . . . . . : 00-53-45-00-00-00
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 144.139.173.17
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . : 144.139.173.17
DNS Servers . . . . . . . . . . . : 203.49.70.20
139.134.2.190
NetBIOS over Tcpip. . . . . . . . : Disabled

Kurt,

Well, assuming that you connect this client to a working ICS host, you're
wasting your time. If the client is running with a fixed address, it may or may
not work. The default gateway is 192.168.0.1, but there are no DNS servers
configured.

ICS clients really need dynamic IP and DNS settings, so they can get those
settings from the ICS host. That's what you get from
This computer connects to the Internet through another computer on my network or
through a residential gateway.
<http://nitecruzr.blogspot.com/2005/05/using-network-setup-wizard-in-windows.html#NATClient>
http://nitecruzr.blogspot.com/2005/05/using-network-setup-wizard-in-windows.html#NATClient

Is the above from the client after running the NSW? Make sure that the DHCP
client service is running on the client.
<http://nitecruzr.blogspot.com/2005/06/services-running-on-your-computer.html>
http://nitecruzr.blogspot.com/2005/06/services-running-on-your-computer.html

--
Cheers,
Chuck, MS-MVP [Windows - Networking]
http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.
.

Relevant Pages

  • RE: RWW not accessible over web
    ... My laptop is docked to the LAN but I take it to client sites. ... option will configure ISA to provide network security and packet filtering. ... the clients unable to access Internet after you enable firewall. ... Before you run the Configure E-mail and Internet Connection Wizard, ...
    (microsoft.public.windows.server.sbs)
  • Re: ICS and FS trouble
    ... The master domain browser is assigned with the ISC client machine. ... >>sharing for ms networks, QoS packet sheduler, internet protcol. ... > Internet connection has a 192.168.0.x address that can't be changed to ...
    (microsoft.public.windowsxp.network_web)
  • Re: share ISDN connection
    ... How to Setup Internet Connection Sharing ... Windows 2000 supports both Network Address Translation and Internet ... Confection Shading (ICS) al1ow workgroup users to access to the Internet.. ...
    (microsoft.public.windowsxp.network_web)
  • Re: openvpn server bridge.
    ... Client has an adsl internet connection. ... I see that, when I try to ping server to client or client to server, there are many arp requests without answer. ...
    (comp.os.linux.networking)
  • Re: openvpn server bridge.
    ... Client has an adsl internet connection. ... I see that, when I try to ping server to client or client to server, there are many arp requests without answer. ...
    (comp.os.linux.networking)