A router with builtin vpn can be easy and cheap (appliance) and many
will support pptp and ipsec.
You could install OpenVPN on WinXP machine too.
Server must have internet visibility, whether by NAT/PAT or ddns...and
you must have a router between clients and xp host that supports vpn
"passthru" or is one advanced enough that you can enable GRE traffic
and port 1723 I think...
Re: Problem connecting to SQL Server ... Deactivate the Firewall on the WinXP machine and see if the problem is still ... >I have a small wireless network with a copy of SQL Server 2000 SP 4 running ... > of the router, the traffic goes to the correct server. ... > have to change the port mapping on the router to change the connection. ... (microsoft.public.access.formscoding)
Re: SBS 2003 Misconfigured? ... I've thrown quite a bit at them, and just have to disagree that they are inherently less secure than the netgear....setup DHCP and I have also gone in and manually created a new scope ... when I first used the Netgear router with SBS 2003, ... than one SBS server in a company makes no sense. ... (microsoft.public.windows.server.sbs)
Re: Cannot connect to RWW from home PC ...eth0 172.26.0.1/16 Extra none ... That would be the address you need a DNS record for. ... One question - if I reset the Thomson Router will that clear all the ... Heres' the info for our server:... (microsoft.public.windows.server.sbs)
Re: NLB Cluster - Ping fails or long time to reply from outside local subnet - SOLVED ...Windows Server 2008 Readiness Team ... I was feeling nervous about our teaming-capable adapter as I read it might be sending out heartbeats, so I disabled it AND configured the cluster on a separate DLink card in multicast mode. ... I am losing the plot with NLB, I have spent a week trying to get it working. ... I thought that the litmus test was that the router functions fine when no NLB is installed, but when it is, things start going screwy. ... (microsoft.public.windows.server.clustering)
Re: Cannot connect to RWW from home PC ... That would be the address you need a DNS record for. ... You say "And in the router you need to forward to your external nic IP" ... Still can't telnet to any of your ports at your public ip address. ... Heres' the info for our server:... (microsoft.public.windows.server.sbs)
