Re: DSL connection

On Wed, 22 Feb 2006 16:32:27 -0800, Guidence-Seeker
<GuidenceSeeker@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

I hope this is the correct discussion group as I was directed here from
another. I have a Compaq SR1230NX Presario, AMD 3200+ Athlon XP, 1 gig Ram,
an A7V8X-LA motherboard, a Speedstream 5100 modem, running XP Home Edition
OS. There are no routers and this is the only connected computer.

I originally had the system connected with a DSL download rate of 1.5 Mbps
(maximum) that realistically gave me about 1.2Mbps dowload speed. I feel
that was logical for the time loss in the modem transfer. I more recently
upgraded to a different speed (3.0 Mbps maximum) from the same ISP. When we
first ran a speed check after the ISP supposably had made the new connection
all that could be obtained was 1.4.

I called the ISP to investigate the problem. After much wrangling they
finnally replaced a card or two on their side and got the rate up to 2.4
through my modem and into their technician's laptop. When the cable was
connected to my CPU (an on-board NIC) all we could get was a 1.9 download
rate and the connection seemed to be slugish at times. I don't have any
security systems that would interfere with the signal and I purchased a
10/100 PCI Dynex DX-E101 NIC. I installed the new NIC and tested the rate
several times after rebooting the system. I went through the Control Panel -
Network and made sure it saw the card and there were no conflicts.

Does anyone have any suggestions on what might be done to correct this, or
is there some hardware restrictions that won't allowa faster rate? Have I
provided enough information to make an assesment? I appreciate any
assistance in advance.

How are you testing your download speed? Are you using the same tool /
destination server that the ISP tech used?

You state that you have no router, nor any security systems that would interfere
with the signal. Which means that you don't have any security to protect you
from malware. I recommend:
# Setup a layered defense for your computer.
<http://nitecruzr.blogspot.com/2005/05/please-protect-yourself-layer-your.html>
http://nitecruzr.blogspot.com/2005/05/please-protect-yourself-layer-your.html
# Check thoroughly for malware.
<http://nitecruzr.blogspot.com/2005/05/dealing-with-malware-adware-spyware.html>
http://nitecruzr.blogspot.com/2005/05/dealing-with-malware-adware-spyware.html

After you do that, we can look for stable and reliable ways of measuring your
download speed.

--
Cheers,
Chuck, MS-MVP [Windows - Networking]
http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.
.

Relevant Pages

  • Re: DSL connection
    ... upgraded to a different speed from the same ISP. ... rate and the connection seemed to be slugish at times. ... You state that you have no router, nor any security systems that would interfere ...
    (microsoft.public.windowsxp.network_web)
  • Re: wvdial problems
    ... when connecting to a different ISP. ... OK - that basically rules out the modem. ... Support people) is dropping the connection before the default (? ... I've subscribed to a new ISP where the local dialup number ...
    (comp.os.linux.misc)
  • Re: Creating ISP connection ADSL
    ... The ISP is Wanadoo. ... The ADSL modem is an Alcatel ... I cannot get it to create a new connection icon ... THE MODEM ATTACHED and DO NOT plug it in until indicated by the installation ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: often need to stop and start DNS service....
    ... If the ISP is re-initializing the cable modem, ... > (DHCP clients renew at some percentage of lease expiration, ... Linksys or Netgear for my connection ...
    (microsoft.public.win2000.dns)
  • Re: DSL in Linux - direct setup?
    ... I attached the phone line into the DSL port on ... the modem but I still don't see any network connection. ... My ISP said ...
    (Debian-User)
Loading