Re: lose internet connectivity in IE and Outlook ONLY

I have tried it at 100mb full duplex, and 10mb half, and the problem still
occurs. I have run ipconfig and netstat and can find nothing out of the
ordinary. The pc node type is set to Mixed. Should this be set to
"Broadcast"? Also, why is the communications to the internet only shut down
in IE and Outlook, yet works through a command window ping?

Leef

"Fatal_Exception" <FatalException@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:6F232C4A-F442-44AB-859C-8B3C655AC391@xxxxxxxxxxxxxxxx
> Try lowering the NIC speed to 10 Mbps / Half Duplex... Use Device Manager
> >
> Network Adapters > Properties > Advanced tab.. You can try various
> settings
> to see if the connection holds.
>
> FE
> Wm P
> CCNA | MVP | MCP | A+
>
> "Leef" wrote:
>
>> Hi,
>> 4 computers in a workgroup (STUDIO), 3 wired and 1 wireless notebook...
>> Internet is served via wireless isp through a linksys WRT54G router. 3
>> pcs
>> (alf, leef and lesdt) hook to a netgear switch that plugs into the
>> router.
>> The problem PC is alf. Sometimes while browsing the net (browser is IE),
>> the internet connectivity will just stop and I will get the "page cannot
>> be
>> displayed" text message. Along with this, Outlook (v2002 for xp) cannot
>> get
>> my mail, and I get "cannot find server". This is only going on, on the
>> alf
>> machine, as the connectivity on the other machines are not affected. I
>> CAN
>> drop to a command window and ping yahoo successfully, and I can ping the
>> other computers and the router from alf, even though I cannot load any
>> internet through IE or Outlook. I can see the other pcs in My Network
>> Places and I can browse to their drives... I try ipconfig /release and
>> ipconfig /renew, but it does not fix the problem. The only thing that
>> fixes
>> it is to power down and on again, where it will work for a while before
>> it
>> happens again. Restart does not always fix it.
>>
>> Please help me with this problem! The network adapter on the alf machine
>> is
>> an Intel PRO/1000 . I have installed the latest drivers, and have tested
>> the cables... all are good. I have checked the event logs for
>> programs,
>> system and security, and there are no corresponding errors to this
>> problem.
>> Also, I scan heavily for viruses and the machine is clean.
>>
>> ANY help would be most appreciated.
>>
>> Sincerely,
>>
>> Leef
>>
>>
>>


.

Relevant Pages

  • Re: lose internet connectivity in IE and Outlook ONLY
    ... Outlook and not internet connection through a command window. ... >>> Internet is served via wireless isp through a linksys WRT54G router. ... >>> The problem PC is alf. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Windows 98SE computer on XP network
    ... Win98 doesn't have IPCONFIG - I believe it uses WINIPCONFIG instead. ... >> are all connected via a router and the router is connected to the ... The 98SE PC has access to the other PCs on the network ... >> lost the ability to access the internet and can't even access the router. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Lan connection and router
    ... A router is an external hardware device which allows a user with a single internet access IP provided by their ISP to connect more than 1 PC to the internet. ... It may be a Dynamic IP supplied by your ISP, yet from what I see in your ipconfig screenshot that DHCP is disabled. ... Follow all of the instructions provided in my previous response check your network properties setup and testing your connection. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: SBS 2003 and the outside world
    ... please run ipconfig /all from your server and display the results here for ... we recommend putting a router on your NIC that's ... I did an ipconfig /all and I see my dns ... I have taken my notebook and used the internet cable from ...
    (microsoft.public.windows.server.sbs)
  • Re: how do I find my ip address?
    ... >> mean your Internet IP AND YOUR INTERNET CONNECTION IS THROUGH YOUR PC AND ... then the advice you've also been given about typing IPCONFIG ... Most home users connecting through a broadband router don't see ...
    (microsoft.public.windowsxp.general)