Re: TCP/IP Settings change back to "Obtain" after setting manually
- From: Chuck <none@xxxxxxxxxxx>
- Date: Thu, 22 Dec 2005 15:15:44 -0800
On Thu, 22 Dec 2005 09:36:03 -0800, kjbsciatl
<kjbsciatl@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
>I've got an XP SP2 machine on a 2003 AD domain. Running Ipconfig says the
>machine has a static IP set, but when you check the network adapter tcpip
>properties, it shows the machine is set to "obtain" ip and dns settings. If
>you go in an manually set the IP and DNS settings, click OK and OK, you can
>ipconfig and see the settings you just made. If you go back in to the nic
>adapter properties, its changed back to "obtain". If you ipconfig, it still
>shows the static info.
Check the scope on the DHCP server, see if it has available addresses. Check
the log on the DHCP server, see if any entries refer to the mysterious XP
computer.
Check the settings on the XP computer, see if it has entries on the Alternate
tab.
http://support.microsoft.com/?id=220874
--
Cheers,
Chuck, MS-MVP [Windows - Networking]
http://nitecruzr.blogspot.com/
Paranoia is not a problem, when it's a normal response from experience.
My email is AT DOT
actual address pchuck mvps org.
.
- Prev by Date: Re: Can't see one system on network
- Next by Date: Re: Need help on ping issue. I thought I knew this stuff.
- Previous by thread: Re: Network only works in one direction
- Next by thread: Configuration problem
- Index(es):
Relevant Pages
|
