RE: Can't enter 2 XP machines into a Workgroup

I totally hear, and I did try that, but it didn't work either. This is the
funny thing about all of this. A while back, I had my XP Home machine hard
wired to the network and the workgroup worked fine. But I had to reformat my
drive on it and unfortunately, the pegs that hold the ethernet cable in
snapped off so the cable keeps sliding out which is why I went to the
wireless USB NIC. I haven't needed the workgroup until now, but even just
holding the hard wire to the machine won't allow it to see the other computer
on the workgroup. I can get Internet access and I ping the gateway, so I
know the wire is good. I just don't know what else to try. Any help is
greatly appreciated.

"Techmanblues" wrote:

> Why not just uninstall NIS altogether and see what happens? Sometimes
> uninstalling the software firewall still does not completely remove it from
> the system. Firewalls like NIS modify Windows own security files. So who
> knows if NIS really put those files and settings back after uninstallation.
>
> From my experience, Norton's Internet Security is more trouble than it's
> worth. I have stopped using it and have been in smooth sailing in terms of
> sharing resources in a network. I mean what is the reaon for installing it in
> a computer anyway? The same goes for ZoneAlarm. The point of all this
> security measures is to prevent the outside world from hacking into the
> computers. Since all the computers in the network trust each other, why
> install NIS on some or all of them? Our attention should focus on permimeter
> security. Therefore, more attention should pay on the strength of the
> router/gateway. If a comsumer level router like those of Linksys and Netgear
> is "perceived" not powerful enough to keep the hackers away, then there are
> "free" alternatives like Smoothwall, IPCop, and M0n0wall where you have
> absolute control over their features. I have spent so many hours trying to
> fix connectivity issues between computers that run software firewalls that in
> retrospect, I should have focused on learning about these free but powerful
> routers.
>
> If I am worried about access security within the LAN,, using XP Pro NTFS
> security policies is more efficient. NTFS security has been around for a long
> time so if there is a problem, I can find help easier online on sites like
> this. The same cannot be said about software firewall. I am pretty sure that
> the percentage of people who use NIS or ZoneAlarm is pretty small. Software
> firewalls have become less practical for the basic users and more academic
> for the networking gurus. As for me who have to run a computer network for a
> living, free time to play around with all the arcane firewall features is a
> luxury.
>
> Sorry for being off topic. Just want to let people know about how strongly I
> feel about it.
>
>
> "Mantis" wrote:
>
> > I have 2 XP machines. One is hard wired to my router using XP Pro, and the
> > other is connected through a Wireless NIC using XP Home Edition. I can ping
> > the XP Home computer from the XP Pro machine, but I can't ping the XP Pro
> > machine from the XP Home machine. I made them under the same workgroup name,
> > but only my XP Home machine can see both computers on the Workgroup, yet it
> > still cannot access the XP Pro machine. I connected into the router and I
> > can see both attached just fine and I don't see anything out of the ordinary
> > in terms of the configuration of the router to indicate that the router is
> > the cause of the problem. I disabled the XP firewalls on both machines and I
> > even disabled my Norton's Internet Security as well. I also recently
> > replaced the router but I was having the same problem on the previous router.
> > Peer-to-Peer windows component is enabled on both machines. I even tried
> > hard wiring the XP Home machine to see if it was the wireless NIC but it
> > proved unsuccessful. I really don't know what else to try. Any help would
> > be greatly appreciated. Thanks
.

Relevant Pages

  • RE: Cant enter 2 XP machines into a Workgroup
    ... Firewalls like NIS modify Windows own security files. ... If a comsumer level router like those of Linksys and Netgear ...
    (microsoft.public.windowsxp.network_web)
  • Re: norton firewall and home network, leaktest
    ... > In my opinion, no, you don't need two firewalls if you have a home network. ... > If you have a router that does NOT do firewalling, ... > and 2) because ICS SUCKS in terms of security. ...
    (comp.security.firewalls)
  • Re: Defense in Depth
    ... What is meant by "layers" of security, is this: the entry points that must be ... Physical Layer - Physical access to the resources. ... attacks and other attacks that go after the software itself. ... "layer" in one long chain (lots of firewalls). ...
    (Security-Basics)
  • RE: Wireless Security for Home Users
    ... for most home users to create and/or manage 2 firewalls and a DMZ. ... As with most network security, ... investigate additional security features available from the WAP ...
    (Security-Basics)
  • RE: [Full-Disclosure] RE: MS SQL WORM IS DESTROYING INTERNET BLOCK PORT 1434!
    ... > 1) I don't trust MS products for security related tasks. ... firewalls running on NT? ... necessary steps to mitigate the risk and protect yourself. ... We still had six boxes hit. ...
    (Full-Disclosure)