Re: networking

Check the network protocols you need are installed for the
NIC/LAN. If you've got SP{2, the Windows firewall is ON by
default, either use a third party firewall, or in any case
set your LAN computers to trusted zone.


--
The people think the Constitution protects their rights;
But government sees it as an obstacle to be overcome.
some support
http://www.usdoj.gov/olc/secondamendment2.htm



"adradon" <adradon@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:99AD1E28-FB33-43C8-9032-EAD409CCC7BC@xxxxxxxxxxxxxxxx
| yes I have. Also, I just did load win xp pro on ours (I
upgraged our computer
| with new hard drive and such). It was doing the same thing
before I upgraded.
|
| "Jim Macklin" wrote:
|
| > Have you run the XP networking wizard on both computers?
| >
| >
| >
| > --
| > The people think the Constitution protects their rights;
| > But government sees it as an obstacle to be overcome.
| > some support
| > http://www.usdoj.gov/olc/secondamendment2.htm
| >
| >
| >
| > "adradon" <adradon@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
| > message
| >
news:FD38A430-3BBF-4A5A-86AE-17CDCA778EB3@xxxxxxxxxxxxxxxx
| > |I am trying to network two PCs through a switch. I have
| > limited or no
| > | connectivity on the host. I get no error messages on
the
| > client. Apparently
| > | DHCP is not working, when I try to repair the
connecton,
| > it says it can't
| > | repair because of the IP address. I tried to assign a
| > static IP but still no
| > | go. I'm running xp pro on the host and xp home on the
| > client. The switch
| > | shows connectivity. I can ping the host from the
client,
| > but can't ping the
| > | client from the host. We have DSL Internet connection.
I
| > had this setup up
| > | and running a couple of years ago with xp pro on the
host
| > and win 98 on the
| > | client and it all worked great. I would greatly
appreciate
| > any help. Thanks
| >
| >
| >


.

Relevant Pages

  • Re: Any known issues withsp2 and non-sp xp ics?
    ... The config in the previous post was for the host installed with modem: Client ... and network bridge15,enabled. ... seems something is blocking the connection.. ...
    (microsoft.public.windowsxp.network_web)
  • Cant get ICS to work win98 host xp client - winsock problem?
    ... I have setup simple 2 pc ethernet network with win98 pc as host and XP SP2 ... as client. ... When I login to the host ("Windows Family Logon") I get "no domain ...
    (microsoft.public.windowsxp.network_web)
  • Re: Problem With Win2K Server/DNS
    ... network, there is no way you could be resolving public names. ... Does it resolve to your DC's IP ... It's certain that you have a connectivity ... I've installed DCDiag on both the DC and an XP client. ...
    (microsoft.public.win2000.dns)
  • Re: Single Client wont connect to internet
    ... Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on ... > I have a wireless network running between 2 PCs both with XP sp1. ... > connection on the host is fine. ... > can't get the client to access the connection on the host, ...
    (microsoft.public.windowsxp.network_web)
  • Re: sentinel/safenet post install no network
    ... port uses a linksys wireless router --> WinXP client with VPN software. ... After reboot I have no network connectivity. ...
    (microsoft.public.windowsxp.work_remotely)
Loading