Re: DHCP Issue
- From: "GTS" <x>
- Date: Sat, 5 Nov 2005 11:51:13 -0500
I'm bothered by the underlying problem of why using another network would
cause this, but don't know the answer. I have many clients with laptops
used this way without this problem except for the occasional issue with the
node type I mentioned earlier. In any case, to answer the script question,
these would be the basic commands for a batch file. There could be a timing
issue with the commands, but you could give it a try.
net stop dhcp
net start dhcp
ipconfig /release
ipconfig /renew
--
"JT" <JT@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:13F7F1A6-B876-4D83-B080-D0617D945E37@xxxxxxxxxxxxxxxx
>I am not really having the same problem as AW. I can get it to work. I
>just
> have to go to there machine and unistall the network adapter, scan for
> hardware changes and it will pull the proper IP. The problem is I have to
> do
> this for every user that leaves the office and connects to another wired
> or
> wireless connection. (ie. hotels). I can get it to work, but it is a
> pain.
> I am looking for a solution so I can automate the process. I have been
> playing around restarting the DHCP client and doing ipconig /release and
> the
> /renew. That seems to work without having to uninstall the adapter
> everytime. I was trying to find a way to restart that service and do the
> ipconfig in a login script or something like that. Any suggestions.
>
> "GTS" wrote:
>
>> I'm puzzled but have a few thoughts particularly given AW's earlier info
>> re.
>> being able to network except Internet with a static IP.
>>
>> 1. Check Internet Options / Connections to make sure no proxy server or
>> other oddity is present.
>> 2. Try running this command >netsh winsock reset catalog Any
>> difference?
>> --
>>
>> "JT" <JT@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:13FE5701-F9B4-4DF3-A569-D38824754BD2@xxxxxxxxxxxxxxxx
>> > It didn't work, but when you restart the DHCP client service. the
>> > IPCONFIG
>> > /RELEASE and /RENEW work. There has got to be something out there to
>> > fix
>> > this problem.
>> >
>> > "JT" wrote:
>> >
>> >> That is the DHCP Client service.
>> >>
>> >> "JT" wrote:
>> >>
>> >> > I was messing around with it yesterday and change the DHCP service
>> >> > recovery
>> >> > on the first and second failure to restart the service. I tried it
>> >> > once and
>> >> > it appeared to work. Not sure if it was just a fluke. I will test
>> >> > it
>> >> > more
>> >> > today. Give it a shot and let me know if it works for you.
>> >> >
>> >> > "AW" wrote:
>> >> >
>> >> > >
>> >> > > tried your suggestgion GTS - it still refuses to pickup a DHCP IP
>> >> > >
>> >> > > I've run through everything again this morning, just to make sure
>> >> > > that
>> >> > > yesterday, it wasn't just me being an idiot.
>> >> > > I've double checked everything - Workgroup, firewalls, services
>> >> > > etc
>> >> > > everything looks to be set as it should - if I specify IP - i can
>> >> > > even
>> >> > > access the servers shared folders.
>> >> > >
>> >> > > the only problem that I can see is - IPSEC Services (which is set
>> >> > > to
>> >> > > Automatic) refuses to start & gives error: 10106 The requested
>> >> > > service
>> >> > > provider could not be loaded or initialised.
>> >> > >
>> >> > > I tried kicking the pc aswell - but this doesn't work either
>> >> > >
>> >> > >
>> >> > > "GTS" wrote:
>> >> > >
>> >> > > > Sometimes this happens because certain public access points may
>> >> > > > change the
>> >> > > > network node type to peer-to-peer. If you are able to run
>> >> > > > IPCONFIG
>> >> > > > /all,
>> >> > > > check the node type (I'm inferring this ipconfig function does
>> >> > > > work.) If
>> >> > > > it shows "Peer-to-Peer" go to at the
>> >> > > > HLM\System\CurrentControlSet\Services\Netbt\Parameters and
>> >> > > > delete
>> >> > > > these
>> >> > > > values if they're present:
>> >> > > > NodeType
>> >> > > > DhcpNodeType
>> >> > > > (Usual warnings re. registry editing..... be careful). Reboot,
>> >> > > > then try
>> >> > > > network again.
>> >> > > > --
>> >> > > >
>> >> > > > "JT" <JT@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> >> > > > news:465F8F13-C305-4DF4-9D99-583187F2F482@xxxxxxxxxxxxxxxx
>> >> > > > >I have several laptop users in the office. Everything works
>> >> > > > >fine
>> >> > > > >until
>> >> > > > >they
>> >> > > > > return from a trip. For some reason there network adapter
>> >> > > > > will
>> >> > > > > not pull
>> >> > > > > an
>> >> > > > > IP from my DHCP server. It will default to the generic
>> >> > > > > adapter
>> >> > > > > address.
>> >> > > > > The
>> >> > > > > only way to get it to work is to uninstall the adapter and
>> >> > > > > scan
>> >> > > > > for
>> >> > > > > hardware
>> >> > > > > changes. Once I do that it will pull the proper address.
>> >> > > > > This
>> >> > > > > happens
>> >> > > > > every
>> >> > > > > time. None of the IPCONFIG commands work either. Does anyone
>> >> > > > > know what
>> >> > > > > might cause this or a solution to the problem?
>> >> > > > >
>> >> > > > > All users are using XP fully patched and I use a juniper
>> >> > > > > router
>> >> > > > > (old
>> >> > > > > netscreen 10) as my DHCP server.
>> >> > > >
>> >> > > >
>> >> > > >
>>
>>
>>
.
- Follow-Ups:
- Re: DHCP Issue
- From: GTS
- Re: DHCP Issue
- References:
- Re: DHCP Issue
- From: JT
- Re: DHCP Issue
- From: GTS
- Re: DHCP Issue
- From: JT
- Re: DHCP Issue
- Prev by Date: Re: Accessability problems between computers in Windows XP Home wo
- Next by Date: Re: How do I delete a PC from a Workgroup
- Previous by thread: Re: DHCP Issue
- Next by thread: Re: DHCP Issue
- Index(es):
Relevant Pages
|
