Re: What do these symbols mean?

I think you are missing what I'm saying.

All is working fine. I seem to be picking up MY signal from the router and
I'm communicating just fine.

For example, right now the 5 vertcal bars are green. When I click on it and
choose View Wireless Networks, it shows mine by name (also indicates it is a
secured network). In the upper right corner, it says DISCONNECTED. But when
I further click on it, it also says I am connected to the network and it
gives me the option to disconnect.

Basically, it's picking up the signal just fine. I don't understand the
DISCONNECTED statement

Your first 2 items below have been done and no need for the third since I am
connected!.

Mel


"RRR_News" <RRR_News@xxxxxxx> wrote in message
news:ueJybjSxFHA.3180@xxxxxxxxxxxxxxxxxxxxxxx
It sounds that your laptop, is not seeing the router signal. If on the
router:
1. If you enabled WEP or any other encryption on the router, you will need
to transfer those settings to the properties tab, for the wireless card. I
would first disable this, and make sure that your wireless network is up and
running. Then enable it later.
2. You need to make sure router and wireless card, uses the same "SSID"
name. Don't use the default ones that came with the router and card. I
believe the default name for the linksys router is "linksys", where the card
may be "default". Use some unique name. And set the wireless card to only
connect to the router's SSID name.
3. Have you tried placing the wireless PC, near the router, to see if you
are getting this problem? If it works when they are close, then you may need
to move the router, it may be the structure of the house preventing the
signal transmission.

--

Add MS to your News Reader: news://msnews.microsoft.com
Rich/rerat

(RRR News) <message rule>

<<Previous Text Snipped to Save Bandwidth When Appropriate>>


"MZB" <moo@xxxxxxxxxxxxxxxxx> wrote in message
news:eiUgKfRxFHA.1856@xxxxxxxxxxxxxxxxxxxxxxx
I have a desktop in the basement and a wireless upstairs, with a wireless
card installed.
I have the linksys router installed downstairs and I have taken steps to
make sure it is a secure network.

All runs fine, but I have a question.

In the lower right corner of my screen (systray or taskbar, can't remember
the correct term) I have 2 symbols.

One consists of about 5 little bars, some green and some yellow. When I pass
the mouse pointer over it, it indicates all sorts of information, including:
:"Status: Not Associated." What does that mean??

There is also a little monitor picture next to it. The status sometimes says
"Acquiring Network Address" and it stays like this. Does this mean it is
picking some other wireless signal (I assume some other secure signal since
it keeps saying acquiring network address). At other times, it might have a
little X on it.
Regardless, it doesn't seem to impact the connection to my router. All works
fine.

Just curious.

Mel



.

Relevant Pages

  • Re: Linksys NAS200 Network Storage adapter
    ... The only two wireless network settings that are of any consequence are the SSID and the encryption method and password. ... either click the "Print Network Settings" button on the final screen of the Wizard or simply access the appropriate XML file and get at them that way and then use the information to configure the router manually as I explained earlier. ... I've read thru some of the MS web site on that product and it appears to do everything a NAS will do plus other cool features, such as, with an xbox360 with the wireless adapter, I can stream my video/pics to my TV for family viewing. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... Finally was able to get some network downtime to make the change in routers ... wireless router, but - once connected to the SBS box and I've run CEICW, the ... I ran the ISA and SBS BPA's and didn't see anything. ... I put the old router back in service so I could work on this some more. ...
    (microsoft.public.windows.server.sbs)
  • Re: share my printer between 2 computers and surf with 2 computers at same time
    ... The main piece of hardware you need to buy is a router. ... Because wireless routers for home use are ... you can use that to have a wired network. ... -2 short UTP cables ...
    (microsoft.public.windowsxp.network_web)
  • Re: share my printer between 2 computers and surf with 2 computers at same time
    ... The main choice you have to make is whether to have the router include wireless capability or not. ... Because wireless routers for home use are relatively inexpensive these days, I'd suggest buying a wireless router even if you don't initially intend to use that capability. ... If you already have a UTP cable going between upstairs and downstairs, you can use that to have a wired network. ... caused by 1) a misconfigured firewall; ...
    (microsoft.public.windowsxp.network_web)
  • Re: share my printer between 2 computers and surf with 2 computers at same time
    ... The main piece of hardware you need to buy is a router. ... Because wireless routers for home use are ... you can use that to have a wired network. ... caused by 1) a misconfigured firewall; ...
    (microsoft.public.windowsxp.network_web)