Re: XP Pro - Logging on to Domain issues

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



Hi there,

I'm sorry I haven't responded sooner to those who were anxious to hear what
the result was. We're still trying a combination of things and taking into
consideration what was recommended. I will update you guys on the progress
and hopefully we get this sorted out since it's a new week.

Thanks for the help.

Regards,
Bobby
"Ron Lowe" <ron-msng@{d.e.l.e.t.e}lowe-family.me.uk> wrote in message
news:e7PZZWOqFHA.1024@xxxxxxxxxxxxxxxxxxxxxxx
> "Bobby" <bobby@xxxxxxxxxxx> wrote in message
> news:%23g7IN0LqFHA.712@xxxxxxxxxxxxxxxxxxxxxxx
> > Another thing discovered is when a different user tries to log on to
that
> > computer (that has access to the domain and can log on to any of the
other
> > computers already on the domain Win2K or not) it says the following
> > message
> > now "The system cannot log you on now because the domain DOMAIN is not
> > available."
> >
> > This makes it seem that XP Pro isn't seeing the domain??
> >
>
>
> As others have indicated, this is almost certainly a DNS configuration
> problem.
> Here's my usual lecture on the topic:
>
> XP differs from previous versions of windows in that it uses
> DNS as it's primary name resolution method for finding domain
> controllers:
>
>
> How Domain Controllers Are Located in Windows XP
> http://support.microsoft.com/default.aspx?scid=kb;en-us;314861
>
>
> If DNS is misconfigured, XP will spend a lot of time waiting for it to
> timeout before it tries using legacy NT4 sytle NetBIOS.
> ( Which may or may not work. )
>
>
> 1) Ensure that the XP clients are all configured to point to the local
> DNS server which hosts the AD domain. That will probably be the
> win2k server itself.
> They should NOT be pointing an an ISP's DNS server.
> An 'ipconfig /all' on the XP box should reveal ONLY the domain's
> DNS server.
>
>
> ( you should use the DHCP server to push out the local DNS server
> address. )
>
>
> 2) Ensure DNS server on win2k is configured to permit dynamic updates.
>
>
> 3) Ensure the win2k server points to itself as a DNS server.
>
>
> 4) For external ( internet ) name resolution, specify your ISP's DNS
server
> not on the clients, but in the 'forwarders' tab of the local win2k DNS
> server.
>
>
> On the DNS server, if you cannot access the 'Forwarders' and 'Root Hints'
> tabs because they are greyed out, that is because there is a root zone
(".")
> present on the DNS server. You MUST delete this root zone to permit the
> server to forward unresolved queries to yout ISP or the root servers.
> Accept any nags etc, and let it delete any corresponding reverse lookuop
> zones if it asks.
>
>
> The following articles may assist you in setting up DNS correctly:
>
>
> Setting Up the Domain Name System for Active Directory
> http://support.microsoft.com/default.aspx?scid=kb;en-us;237675
> HOW TO: Configure DNS for Internet Access in Windows 2000
> http://support.microsoft.com/default.aspx?scid=kb;en-us;300202
>
>
>
>
> --
> Best Regards
> Ron Lowe
> MVP - Windows Networking
>
>


.



Relevant Pages

  • RE: [SLE] Linux still surfs slower than Windows
    ... Linux still surfs slower than Windows ... I have two Suse 9.1 Linuxes and one Win2k on a LAN behind a Linksys ... statically configured DNS server addresses set to the values shown by ... The Windows host also has a static IP and manually configured DNS ...
    (SuSE)
  • Linux still surfs slower than Windows
    ... I have two Suse 9.1 Linuxes and one Win2k on a LAN behind a Linksys ... WRT54G router connected to SBC/Yahoo DSL. ... statically configured DNS server addresses set to the values shown by ... The Windows host also has a static IP and manually configured DNS ...
    (comp.os.linux.networking)
  • [SLE] Linux still surfs slower than Windows
    ... I have two Suse 9.1 Linuxes and one Win2k on a LAN behind a Linksys ... WRT54G router connected to SBC/Yahoo DSL. ... statically configured DNS server addresses set to the values shown by ... The Windows host also has a static IP and manually configured DNS ...
    (SuSE)
  • Re: Services
    ... Windows 2000": ... >Network Connections Manager ... >DNS Server (unless you have a Dynamic DNS server already ... >Remember, that was written for Win2k Server, but should ...
    (microsoft.public.win2000.security)
  • Re: Services
    ... Network Connections Manager ... DNS Server ... Remember, that was written for Win2k Server, but should apply to Win2k pro ... For further info, go to www.sans.org 's reading room, and "Hardening Windows ...
    (microsoft.public.win2000.security)