RE: 802.1x Authentication



"nedasima" wrote:

> Hi. I'm trying to set up 802.1x authentication. I have a switch Catalyst
> Cisco 2950 series and I'm using IAS on Windows 2000 Server, but the
> supplicant (XPSP2) can not to access to the network, although switch prompts
> me username and password. Log in IAS indicate "signature attribute is not
> valid". I have a doubt: Is EAPOL (EAP over LAN) equal to PEAP or they are
> compatible? Because the documentation of Cisco says this switch use EAPOL and
> in the IAS of w2k is only available PEAP, MD5-Challenge and Smart Card and
> other Certificate. Can anyone help me, please?
> --
> nedasima
.

Relevant Pages

  • Re: 802.1x Authentication
    ... I have a switch Catalyst ... Log in IAS indicate "signature attribute is not ... Because the documentation of Cisco say this switch use EAPOL ... MVP - Windows Networking ...
    (microsoft.public.windowsxp.network_web)
  • Re: IAS with PEAP and Airespace (now Cisco 1000)
    ... I couldn't get any authentication protocol to work with IAS and had to switch over to Cisco ACS and use LEAP. ...
    (microsoft.public.internet.radius)
  • RE: 802.1x Authentication
    ... This is most likely the shared secret between the 2950 and IAS ... "nedasima" wrote: ... I have a switch Catalyst ... Is EAPOL equal to PEAP or they are ...
    (microsoft.public.windowsxp.network_web)
  • Re: Cat 2924
    ... Copyright 1986-2004 by cisco Systems, ... BOX in both H/W and S/W, compared to a C2924-XL Switch... ... FastEthernet0/1 failed front-end loopback test ... to make the port configuration "visible", you need to apply 2 commands ...
    (comp.dcom.sys.cisco)
  • Re: VPN over wireless
    ... I personally use Cisco since I am Cisco Certified. ... Support with a Cisco Switch it would work. ... on my network - and no success. ... You will still the need the Router to issue DHCP and ...
    (microsoft.public.windows.server.sbs)
Loading