tcp/ip driver is invalid

Tech-Archive recommends: Fix windows errors by optimizing your registry

ipconfig /all gives message: internal error . The request is not supported.
The request is not supported.

^^^^^^ Additional error message & history.

ipconfig /all "internal error"
The request is not supported.

Windows XP Pro SP 1
Ethernet connection. Netgear Wireless card also installed. Neither can
connect.

No firewall.

"DNS Client", IPSEC,"DHCP Client", will not start.
Error 1068 "dependency service or group failed to start"
There are many other services which are stopped, but I don't know if they
are important to this issue.


The problem began after attempting to upgrade to XP SP2. I wasn't present
when the upgrade to SP2 was attempted. I don't know if any error messages
occurred during the upgrade attempt.

Event Viewer:
Service Control Manager. Event ID 7000
tcp/ip service protocol driver failed to start. "specified driver is invalid".

Computer had moderate amount of spyware, & infected files, which I have
removed.

^^^^^^^^

Windows XP Pro SP 1
Ethernet connection. Netgear Wireless card also installed. Neither can
connect.

No firewall.

"DNS Client", IPSEC,"DHCP Client", will not start.
Error 1068 "dependency service or group failed to start"
There are many other services which are stopped, but I don't know if they
are important to this issue.


The problem began after attempting to upgrade to XP SP2. I wasn't present
when the upgrade to SP2 was attempted. I don't know if any error messages
occurred during the upgrade attempt.

Event Viewer:
Service Control Manager. Event ID 7000
tcp/ip service protocol driver failed to start. "specified driver is invalid".

Computer had moderate amount of spyware, & infected files, which I have
removed.
***********
things I have tried in the past 3 hours:

1. I uninstalled the wi-fi nic, turned off PC, removed wi-fi nic.

2. I uninstalled the ethernet nic, turned off PC, removed ethernet nic [
real tek chip ].

3. I turned off the PC, installed a 3 com nic & driver.

4. ran WinSockFix
5. ran LspFIX

6. Tried to repair connection, > "failed to query tcp/ip"

7. from command prompt: netsh int ip reset resetlog.txt
Here's the log, but the problem persists.

reset SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain

added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{355165
82-1A8C-4D62-ADB6-AC46DEF84F22}\NetbiosOptions
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{54AA88
38-72FC-4DEB-80D5-8C161864F171}\NetbiosOptions
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\TcpAllowedPorts
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{44E91C79-5C7B-45DE-BBE0-B1798AB0655D}\UdpAllowedPorts
old REG_MULTI_SZ =
0

added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\TcpAllowedPorts
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{8B45FF83-13BB-47E8-8BEE-E46879BF9F72}\UdpAllowedPorts
old REG_MULTI_SZ =
0

deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDef
ault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\TcpWindowSize
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_104C&DEV_9066&SUBSYS_4C001385&REV_00\3&61AAA01&0&48. bad value was:
REG_MULTI_SZ =
PSched

reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched

reset Linkage\UpperBind for
PCI\VEN_10EC&DEV_8139&SUBSYS_813910EC&REV_10\3&61AAA01&0&58. bad value was:
REG_MULTI_SZ =
PSched

<completed>

reset SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain

deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\AddressType
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\DisableDynamicUpdate
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\TcpAllowedPorts
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{0BB46FB0-30DE-46B0-9FE1-8BA039766F89}\UdpAllowedPorts
old REG_MULTI_SZ =
0

deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDef
ault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_10B7&DEV_9200&SUBSYS_100010B7&REV_78\3&61AAA01&0&58. bad value was:
REG_MULTI_SZ =
PSched

reset Linkage\UpperBind for
PCI\VEN_104C&DEV_9066&SUBSYS_4C001385&REV_00\3&61AAA01&0&48. bad value was:
REG_MULTI_SZ =
PSched

reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched

<completed>
8. Searched registry for SymTDI. Not found.

9. re-installed tcp/ip on top of itself

Thanks for your help.

WC
.

Relevant Pages

  • Re: machines cant update their machine account passwords
    ... With out log and/or error details it will be difficult to impossible ... that could apply to my problem w/o relying on specific error messages. ... is broken and resetting the machine password fixes it but that assumes ... You reset their passwords ...
    (microsoft.public.windows.server.active_directory)
  • Random freeze on CS 5530
    ... If i plug video+key i see a lot of error messages ... After the RESET all the system appears UP and ready ... before the freeze; in some case I been able to see, ... send the line "unsubscribe linux-kernel" in ...
    (Linux-Kernel)
  • Re: tcp/ip driver is invalid
    ... >> The problem began after attempting to upgrade to XP SP2. ... I don't know if any error messages ... netsh int ip reset resetlog.txt ...
    (microsoft.public.windowsxp.network_web)
  • Re: Internet Explorer Problems
    ... solution from Chuck that reset the winsock settings. ... >>I have a rather curious problem with Internet Explorer. ... >Report success / exact text of error messages. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Help! All peripherals accesed while online quit working!
    ... > your action that results in this unexpected response? ... No error messages at all. ... Reinstalled IE6 w/SP1 from the ... hijacked and can't reset. ...
    (microsoft.public.win2000.new_user)