RE: Network name no longer available

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: BAR (BAR_at_discussions.microsoft.com)
Date: 02/19/05 

Date: Fri, 18 Feb 2005 16:39:02 -0800

Are all the network cards and hub or switch at the same performance: 10/100
or otherwise?

"Perry" wrote:

> I have read through the posts on 'specified network name no longer available'
> and still have not been able to figure out this problem. I have a 2003
> domain with 2 XP Pro SP2 machines running, NTFS on all systems. I can move
> small files between the XP machines without problem, but around 4MB or larger
> it times out with the no longer available msg. I can move the same file
> between the server and either XP machine without problem. I tested this with
> a 26MB files. I have downloaded the lastest network drivers for both XP
> machines, no difference.
>
> Thanks for any help,
> Perry
>
>

Relevant Pages

  • Re: How to tighten up access to SBS?
    ... switch, it is easy to plug a simple hub between a switch that can ... authenticate and open the switch port and plug a second machine into (the ... now active) hub and ride the managed switch. ... Guest machines will still have an IP address on your subnet, ...
    (microsoft.public.windows.server.sbs)
  • Re: Getting DSL on 2 computers
    ... Basically, the connection goes to the device, which is connected in turn to both machines. ... A hub is the simplest, basically allowing the machines to communicate through its uplink. ... A router or switch are more intelligent devices, ...
    (microsoft.public.windowsxp.general)
  • Re: How to tighten up access to SBS?
    ... Even if you have a managed switch, it is easy to plug a simple hub between a switch that can authenticate and open the switch port and plug a second machine into hub and ride the managed switch. ... Guest machines will still have an IP address on your subnet, but can't access your server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Newbie Network Help
    ... I also have a 5 port ethernet hub. ... to allow both machines on line at same time was to just hook them up ... machines I must reset the modem and re asign ip each time I switch ... or do I need to buy a router. ...
    (microsoft.public.windows.vista.networking_sharing)
  • Re: copying a 12GB file
    ... Have you tried directly connecting together the two machines that are ... between a very large and old cisco switch and a router. ... The network cards may have issues, but I experienced similar problems at ... it must have something to do with NFS ...
    (Debian-User)