Re: ICS Client

From: magj (contactmagjATWITHOUTCAPS_at_msn.com)
Date: 01/16/05 

Date: Sun, 16 Jan 2005 13:46:20 +0330

Thanks Phoenix,

But it's not a Firewall issue 'cause I turned off LAN FW, and even Internet
connection itself to test ....,

is there a way to control NAT in XP pro , as we do in 2000

this is related to one of my computer which I HAVE TO use for ICS host ,
and when I am using the others for host there's no problem

thanks, 

-- 
Regards,
Sincerely,
magj
"phoenix" <phoenix@fakeaddress.invalid> wrote in message 
news:1ucu0aexlj7r.dlg@phoenix-systems.uk.com...
> On Sat, 15 Jan 2005 13:13:55 +0330, magj wrote:
>
>> Hi!
>>
>> Got a trouble sharing Internet Connection (ICS),
>>
>> XP PRO SP2 (all)  -   On a LAN ---Network Wizard - I Setup the Internet
>> Connection Sharing. No other network Trouble
>>
>> Now I Can Browse Internet from all computers. -
>>
>> TROUBLE: From client Computers I cannot Access mail, messenger, https - I
>> had run Troubleshooting - Ran Network Wizard again (first on host then
>> Clients) - Got nothing......
>> Checked the services.....-
>>
>> I think this should be related to NAT, ...when I connect through proxy 
>> from
>> the HOST Computer,  I cannot even browse the http pages FROM CLIENTS.
>> I tried to change the host an clients :>  No Problems
>>
>> how can I setup NAT.
>>
>> any suggestions except Formatting the windows is appreciated ;-)
>> thanks in advance,
>
> Hi
>
> There should be no problem accessing email etc. through ICS. First, do you
> have a firewall installed on the ICS host? If you do and it's not the XP
> one then reduce the Internet Security setting to Medium and/or add your 
> LAN
> subnet to the Trusted Zone.
>
> The second thing I'd suggest is going to this page 
> www.dslreports.com/tools
> and run the Tweak test. Make any recommended changes and reboot your 
> system
> for them to take effect, do that on all the PCs on your LAN including the
> ICS host. See if those suggestions help and post again if you still have
> problems.
>
> Regards
>
> Bill

Relevant Pages

  • Re: [fw-wiz] static nat for inside returning traffic
    ... Either way NAPT or NAT you need a Static NAT from the a routable IP ... the outbound initiated access for your inside host. ... route in for any hosts on the Internet, ... behind the PIX's external interface IP or any another global IP ...
    (Firewall-Wizards)
  • RE: NetBIOS Messenger spam - how did it get in?
    ... you mention so that it routes right past your NAT. ... > By adding a route to the network you can directly reach the machines ... > It is raining on the Internet. ... The gateway is a Windows 2000 host ...
    (Security-Basics)
  • Re: Question
    ... NAT is the function of rewriting network addresses, ... rfc1918 addresses) to unique, or "real" Internet addresses. ... Port Address Translation) ... Src host Src port - NAT host NAT port - Dst host Dst port ...
    (comp.security.firewalls)
  • Re: Got internet connection sharing working with Free Zone Alarm
    ... The client pc could ... Is the ICS host configured as your Primary DNS server on ... Putting the security level onto medium for the internet made it ...
    (microsoft.public.win2000.networking)
  • Re: Dinamyc and static nat whit only one public ip address?
    ... original tcp port on which host actually listens) ... TCP port is translated port on which NAT router listens ... for Internet requests for this translated host. ...
    (comp.dcom.sys.cisco)