Re: File/resource sharing problem over existing wireless network

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Carey Holzman (carey_at_careyholzman.com)
Date: 12/13/04


Date: Mon, 13 Dec 2004 03:28:39 -0700

If I understand correctly, the laptop has XP PRO and is inaccessible from
the desktop which has XP HOME.

Windows XP Pro: two policies can be found in Control Panel, Performance and
Maintenance, Administrative Tools, Local Security Policy (or click Start,
Run, and enter: gpedit.msc), expand Computer configuration, Windows
settings, Security settings, Local policies, Assign user rights, then search
for the two policies named:
  a.. Access this computer from the network
  b.. Deny access to this computer from the network
Double-click on the second one. It usually contains a SUPPORT user. Some
third party software adds Guest or some other user or group here.

If Guest is included, guest access (all users who do not have an account
with the same username and password on the target computer) from other
computers is not possible and yields the above-mentioned error message.
Remove Guest and all other groups or users who should be able to access this
computer over the network. The SUPPORT user entry may remain in place.

In the policy, "Access this computer from the network" make sure that the
group Everyone is included. If not, add it as a new, last line under the
other entries.

(above copied from: http://www.michna.com/kb/wxnet.htm)

Let me know if this helps.

Carey

"Clive" <Clive@discussions.microsoft.com> wrote in message
news:CF37B563-9C23-4864-BF39-4B9E726F9BE3@microsoft.com...
> Carey
>
> The original configuration was laptop with built-in wireless, desktop with
> Linksys wireless USB adapter and Linksys wireless broadband router (acting
> as
> an access control point only). The wireless network was set up with a
> unique
> SSID (not "Linksys"!) and WEP key, so my understanding was that security
> was
> okay. Initially, I ran this for file and printer sharing only until I was
> due to get broadband.
>
> However, when broadband arrived a couple of months ago, it came with a USB
> modem, so I couldn't plug the Linksys wireless broadband router into it.
> As
> a temporary measure, I connected the broadband modem to the laptop, so the
> Linksys router continued to act as an access point only. The bridge on
> the
> laptop was configured for wireless and local area connection so that I
> could
> connect directly to the Linksys box to configure/reconfigure when
> necessary.
>
> This set up worked until the laptop hard disk crashed.
>
> I've made the changes to both machines -- NodeType was not present on
> either
> but DhcpNodeType has been set to zero and the machines rebooted. Ipconfig
> now shows "Node Type: Unknown" on both machines.
>
> I still have the problem.
>
> Regards,
>
> Clive.
>
> PS In the spirit of trying to keep things simple, I had intended changing
> the USB broadband modem/Linksys router combination for an integrated
> wireless
> router/modem in the New Year (broadband modems with Ethernet ports seem
> almost as expensive and integrated units in the UK). I'd value your
> thoughts.
>
>
>
> "Carey Holzman" wrote:
>
>> Sorry, ignore that last message about restrictanonymous.. I read further
>> down the thread and saw we went there already.
>>
>> I am curious how you have these machines configured. You have a wireless
>> USB
>> NIC on the desktop, and you have the cable modem plugged directly into
>> the
>> laptop and are using another NIC on the laptop to share that connection.
>>
>> Does the laptop have built-in wireless and you are in Ad-Hoc mode with
>> the
>> wireless NICs?
>>
>> That's just bad jo-jo with regards to wireless security.
>>
>> Although the Node Type shouldn't matter, I'd feel better seeing your Node
>> Type set to Unknown. To do this, on each PC, run the registry editor,
>> open
>> this key:
>>
>> HLM\System\CurrentControlSet\Services\Netbt\Parameters
>>
>> and delete these values if they're present:
>>
>> NodeType
>> DhcpNodeType
>>
>> Reboot, then try IPCONFIG /ALL again to see if the Node Type has changed
>> to
>> UNKNOWN on both PCs. If so, try to access the network again.
>>
>> Carey
>>
>> "Clive" <Clive@discussions.microsoft.com> wrote in message
>> news:890AB376-13E6-42F5-A659-97B3D6BC310F@microsoft.com...
>> > Carey
>> >
>> > ipconfig /all for the laptop as follows:
>> >
>> >
>> > Windows IP Configuration
>> > Host Name . . . . . . . . . . . . : CLIVE-LAPTOP
>> > Primary Dns Suffix . . . . . . . :
>> > Node Type . . . . . . . . . . . . : Hybrid
>> > IP Routing Enabled. . . . . . . . : Yes
>> > WINS Proxy Enabled. . . . . . . . : No
>> >
>> > Ethernet adapter Network Bridge (Network Bridge) 6:
>> > Connection-specific DNS Suffix . :
>> > Description . . . . . . . . . . . : MAC Bridge Miniport
>> > Physical Address. . . . . . . . . : 02-04-23-4C-58-FF
>> > Dhcp Enabled. . . . . . . . . . . : No
>> > IP Address. . . . . . . . . . . . : 192.168.1.100
>> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> > Default Gateway . . . . . . . . . :
>> >
>> > PPP adapter BT Broadband:
>> > Connection-specific DNS Suffix . :
>> > Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
>> > Physical Address. . . . . . . . . : 00-53-45-00-00-00
>> > Dhcp Enabled. . . . . . . . . . . : No
>> > IP Address. . . . . . . . . . . . : 81.157.0.215
>> > Subnet Mask . . . . . . . . . . . : 255.255.255.255
>> > Default Gateway . . . . . . . . . : 81.157.0.215
>> > DNS Servers . . . . . . . . . . . : 194.74.65.69
>> > 194.72.9.38
>> >
>> >
>> >
>> > ipconfig /all for the desktop as follows:
>> >
>> >
>> > Windows IP Configuration
>> > Host Name . . . . . . . . . . . . : TAYLOR
>> > Primary Dns Suffix . . . . . . . :
>> > Node Type . . . . . . . . . . . . : Mixed
>> > IP Routing Enabled. . . . . . . . : No
>> > WINS Proxy Enabled. . . . . . . . : No
>> >
>> > Ethernet adapter Wireless Network Connection 3:
>> > Connection-specific DNS Suffix . :
>> > Description . . . . . . . . . . . : Instant Wireless USB Network
>> > Adapter ver.2.6
>> > Physical Address. . . . . . . . . : 00-06-25-0E-58-8A
>> > Dhcp Enabled. . . . . . . . . . . : Yes
>> > Autoconfiguration Enabled . . . . : Yes
>> > IP Address. . . . . . . . . . . . : 192.168.1.101
>> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> > Default Gateway . . . . . . . . . : 192.168.1.1
>> > DHCP Server . . . . . . . . . . . : 192.168.1.1
>> > DNS Servers . . . . . . . . . . . : 192.168.1.1
>> > Lease Obtained. . . . . . . . . . : 13 December 2004 07:35:25
>> > Lease Expires . . . . . . . . . . : 13 December 2004 07:40:25
>> >
>> >
>> > Regards
>> >
>> > Clive.
>> >
>> >
>> >
>> > "Carey Holzman" wrote:
>> >
>> >> Please send me the IPCONFIG info from each PC
>> >>
>> >> Click Start, click Run, type: cmd (and hit enter)
>> >>
>> >> Type: ipconfig /all >c:\ipconfig.txt (and hit enter)
>> >>
>> >> Use Notepad to open c:\ipconfig.txt and copy and paste entire contents
>> >> into
>> >> your next post.
>> >>
>> >> Thanks,
>> >> Carey
>> >>
>> >> "Clive" <Clive@discussions.microsoft.com> wrote in message
>> >> news:DE32A703-E9C2-48A8-BAC1-B6EDB83B73DC@microsoft.com...
>> >> > Carey
>> >> >
>> >> > Thanks for the suggestion. I've looked at both machines and Client
>> >> > for
>> >> > MS
>> >> > Networks and File and Printer Sharing were installed and they had
>> >> > checks
>> >> > next
>> >> > to them. So, I still have the problem.
>> >> >
>> >> > Regards,
>> >> >
>> >> > Clive.
>> >> >
>> >> > "Carey Holzman" wrote:
>> >> >
>> >> >> In the network properties of each machine, do you have Client for
>> >> >> MS
>> >> >> Networks and File and Printer Sharing installed (Also, on the xp
>> >> >> pc,
>> >> >> do
>> >> >> they
>> >> >> have checks next to them?)
>> >> >>
>> >> >> Carey
>> >> >>
>> >> >> "Clive" <Clive@discussions.microsoft.com> wrote in message
>> >> >> news:45509D70-4161-4357-87DD-CE2411A77B55@microsoft.com...
>> >> >> > Carey
>> >> >> >
>> >> >> > Thanks for the suggestion. I've set "RestrictAnonymous" to 0 on
>> >> >> > both
>> >> >> > machines and rebooted. I still have the problem.
>> >> >> >
>> >> >> > Regards,
>> >> >> >
>> >> >> > Clive.
>> >> >> >
>> >> >> > "Carey Holzman" wrote:
>> >> >> >
>> >> >> >> On the laptop, click Start, click Run, type:
>> >> >> >> Regedit (hit enter)
>> >> >> >>
>> >> >> >> Next, locate HKLM\System\CurrentControlSet\Control\Lsa
>> >> >> >>
>> >> >> >> Ensure that "RestrictAnonymous" is set to 0.
>> >> >> >>
>> >> >> >> Close and reboot.
>> >> >> >> That should solve it.
>> >> >> >>
>> >> >> >> Carey
>> >> >> >>
>> >> >> >> "Clive" <Clive@discussions.microsoft.com> wrote in message
>> >> >> >> news:310DDAFF-3797-4360-9FEF-8DE805B96629@microsoft.com...
>> >> >> >> > "Chuck" wrote:
>> >> >> >> >
>> >> >> >> >> On Mon, 6 Dec 2004 09:52:25 -0800, "Clive"
>> >> >> >> >> <Clive@discussions.microsoft.com>
>> >> >> >> >> wrote:
>> >> >> >> >>
>> >> >> >> >> >My existing wireless network was working fine until the
>> >> >> >> >> >laptop
>> >> >> >> >> >hard
>> >> >> >> >> >disk
>> >> >> >> >> >crashed last week and I'm in the process of rebuilding it.
>> >> >> >> >> >The
>> >> >> >> >> >nework
>> >> >> >> >> >was set
>> >> >> >> >> >up as follows:
>> >> >> >> >> >
>> >> >> >> >> >- Laptop running XP Pro, McAfee firewall (trusted IP
>> >> >> >> >> >addresses
>> >> >> >> >> >set).
>> >> >> >> >> >Connects directly to internet via broadband
>> >> >> >> >> >- Desktop running XP Home, McAfee firewall (trusted IP
>> >> >> >> >> >addresses
>> >> >> >> >> >set).
>> >> >> >> >> >Printers directly connected to this machine. Connects to
>> >> >> >> >> >internet
>> >> >> >> >> >through
>> >> >> >> >> >laptop via wireless network
>> >> >> >> >> >- Linksys Access Control Point
>> >> >> >> >> >
>> >> >> >> >> >Both machines can ping each other. Both machines have the
>> >> >> >> >> >same
>> >> >> >> >> >folders
>> >> >> >> >> >set
>> >> >> >> >> >for sharing.
>> >> >> >> >> >
>> >> >> >> >> >Laptop can access shared folders on desktop and print
>> >> >> >> >> >through
>> >> >> >> >> >the
>> >> >> >> >> >desktop.
>> >> >> >> >> >
>> >> >> >> >> >Desktop can 'see' laptop via 'view workgroup computers'.
>> >> >> >> >> >However,
>> >> >> >> >> >when
>> >> >> >> >> >try
>> >> >> >> >> >to connect to laptop from this screen, via start-run-"cmd"
>> >> >> >> >> >or
>> >> >> >> >> >drive
>> >> >> >> >> >mapping
>> >> >> >> >> >get error:
>> >> >> >> >> >
>> >> >> >> >> >"\\Clive-laptop is not accessible. You might not have
>> >> >> >> >> >permission
>> >> >> >> >> >to
>> >> >> >> >> >use
>> >> >> >> >> >this
>> >> >> >> >> >network resource. Contact the administrator of this server
>> >> >> >> >> >to
>> >> >> >> >> >find
>> >> >> >> >> >out
>> >> >> >> >> >if you
>> >> >> >> >> >haqve access permissions. Logon failure: the user has not
>> >> >> >> >> >been
>> >> >> >> >> >granted
>> >> >> >> >> >the
>> >> >> >> >> >requested logon type at this computer."
>> >> >> >> >> >
>> >> >> >> >> >Having read through postings to this forum, the Guest
>> >> >> >> >> >account
>> >> >> >> >> >has
>> >> >> >> >> >now
>> >> >> >> >> >been
>> >> >> >> >> >enabled on both computers (though it wasn't originally).
>> >> >> >> >> >This
>> >> >> >> >> >still
>> >> >> >> >> >hasn't
>> >> >> >> >> >worked. The restrictanonymous and restrictanonymoussam
>> >> >> >> >> >registry
>> >> >> >> >> >keys
>> >> >> >> >> >are
>> >> >> >> >> >unchanged at 1. The server service is running on both
>> >> >> >> >> >machines.
>> >> >> >> >> >
>> >> >> >> >> >The problem must be with the laptop as everything worked
>> >> >> >> >> >before
>> >> >> >> >> >the
>> >> >> >> >> >hard
>> >> >> >> >> >disk crash... Any suggestions?
>> >> >> >> >> >
>> >> >> >> >> >Many thanks.
>> >> >> >> >>
>> >> >> >> >> Clive,
>> >> >> >> >>
>> >> >> >> >> On the laptop, check to see if Simple File Sharing (Control
>> >> >> >> >> Panel -
>> >> >> >> >> Folder
>> >> >> >> >> Options - View - Advanced settings) is enabled or disabled.
>> >> >> >> >> With
>> >> >> >> >> your
>> >> >> >> >> LAN, you
>> >> >> >> >> need to have SFS enabled.
>> >> >> >> >>
>> >> >> >> >> Did you enable Guest using Start - Run - "cmd", then type
>> >> >> >> >> "net
>> >> >> >> >> user
>> >> >> >> >> guest
>> >> >> >> >> /active:yes" in the command window?
>> >> >> >> >>
>> >> >> >> >> On the laptop, check your Local Security Policy (Control
>> >> >> >> >> Panel -
>> >> >> >> >> Administrative
>> >> >> >> >> Tools) - User Rights Assignment, and look at "Deny access to
>> >> >> >> >> this
>> >> >> >> >> computer from
>> >> >> >> >> the network". Make sure Guest is not in the list.
>> >> >> >> >>
>> >> >> >> >> --
>> >> >> >> >> Cheers,
>> >> >> >> >> Chuck
>> >> >> >> >> Paranoia comes from experience - and is not necessarily a bad
>> >> >> >> >> thing.
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> > Chuck
>> >> >> >> >
>> >> >> >> > On the laptop:
>> >> >> >> >
>> >> >> >> > 1) Simple File Sharing was already enabled
>> >> >> >> > 2) Guest was already enabled
>> >> >> >> > 3) Guest was not on the "Deny access..." list
>> >> >> >> >
>> >> >> >> > So it was not these. By the way, when I type in "Net view
>> >> >> >> > clive-laptop"
>> >> >> >> > to
>> >> >> >> > the cmd window on the desktop, I get the error "System error 5
>> >> >> >> > has
>> >> >> >> > occurred.
>> >> >> >> > Access is denied."
>> >> >> >> >
>> >> >> >> > Regards,
>> >> >> >> >
>> >> >> >> > Clive.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>



Relevant Pages

  • Re: One Users My Documents no longer redirected.
    ... even connect to the network at all because it's a PITA. ... So I would think that a wireless 54 mbps connection would be ... one laptop, and try it for a day or two to see what happens. ... active directory OU as the other users whose redirection works? ...
    (microsoft.public.windows.server.sbs)
  • [NMRC Advisory] Microsoft Windows Wireless Exposure on Laptops
    ... Application: Wireless Network Connection ... This advisory documents an anomaly involving Microsoft's Wireless Network ... If a laptop connects to an ad-hoc network it can later start ... This is known as a Link-Local address, and by default Link-Local is turned on on all Windows platforms on all interfaces, including wireless interfaces. ...
    (Bugtraq)
  • Re: One Users My Documents no longer redirected.
    ... So I would think that a wireless 54 mbps connection would be good ... laptop, and try it for a day or two to see what happens. ... client PCs will log into the network without a user login. ... active directory OU as the other users whose redirection works? ...
    (microsoft.public.windows.server.sbs)
  • Re: Linksys WRT54G acts like a dumb hub, no DHCP or wireless capabilities
    ... laptop and the PC would lose connection with the router. ... Well, the results are the same: I can connect to the wireless network, ... but after about 10 minutes I will lose connection with the router. ...
    (alt.internet.wireless)
  • Re: Sharing access denied -Too confused or stupid to figure out sh
    ... I could run it from laptop through network. ... USB for wireless broadband is attached to PC1 ... It is Not clear to ne your current Network topology and how the local ...
    (microsoft.public.windowsxp.network_web)