Re: windows xp and 2000 home network

From: Chuck (none_at_example.net)
Date: 12/12/04


Date: 12 Dec 2004 14:20:13 -0600

On Sun, 12 Dec 2004 16:10:33 -0500, "gz" <*email_address_deleted*> wrote:

>hi there:
>I've set an XP to connect to Win2000. Same work group name but when I click
>the network, an error occured:
>
>Workgroup is not accessible. You might not have permission to use this
>network resorce. Contact the administator of this server to find out if you
>have access permissions.
>The list of servers for this workgroup is not currently available.
>
>The network connection is three computers and a DSL modem connected to a
>hub. the three computers are installed with windows xp, windows 2000 and
>windows 98 respectively. the DSL modem is connect to internet. Now, all
>computers can connect to internet directly, the windows 2000 PC can see the
>window sp on workgroup list but cannot open XP. The error message is "cannot
>visit \\winXP, cannot find the network path ".
>
>How can I set the network?

Are your computers connected to a hub, or to a NAT router? Are you paying for
internet service for three computers?

Let's start by looking at ipconfig information for each computer.
Start - Run - "cmd". Type "ipconfig /all >c:\ipconfig.txt" into the command
window - Open c:\ipconfig.txt in Notepad, check Format - Word Wrap to make it
readable, copy and paste entire contents into your next post. Identify
operating system (by name, version, and SP level) with each ipconfig listing.

This could be a browser problem (no, I'm not talking about Internet Explorer).

The Microsoft Browstat program will show us what browsers you have in your
domain / workgroup, at any time.
http://support.microsoft.com/?id=188305

You can download Browstat from either:
<http://www.dynawell.com/reskit/microsoft/win2000/browstat.zip>
<http://rescomp.stanford.edu/staff/manual/rcc/tools/browstat.zip>

Browstat is very small (40K), and needs no install. Just unzip the downloaded
file, copy browstat.exe to any folder in the Path, and run it from a command
window, by "browstat status". Make sure all computers give the same result.

For more information about the browser subsystem (very intricate), see:
http://support.microsoft.com/?id=188001
http://support.microsoft.com/?id=188305
<http://www.microsoft.com/technet/prodtechnol/winntas/deploy/prodspecs/ntbrowse.mspx>

Let's look at browstat information for each computer, too.
Start - Run - "cmd". Type "browstat status >c:\browstat.txt" into the command
window - Open c:\browstat.txt in Notepad, copy and paste into your next post.
Identify each computer by name and operating system.

-- 
Cheers,
Chuck
Paranoia comes from experience - and is not necessarily a bad thing.


Relevant Pages

  • Help with 070-217
    ... The network contains 25,000 computers. ... single Windows 2000 domain named research.contoso.com. ... Server computers that are configured as domain controllers. ...
    (microsoft.public.cert.exam.mcse)
  • Re: Help with 070-217
    ... The network contains 25,000 computers. ... > single Windows 2000 domain named research.contoso.com. ... > Server computers that are configured as domain controllers. ...
    (microsoft.public.cert.exam.mcse)
  • RE: Help with 070-217
    ... The network contains 25,000 computers. ... > single Windows 2000 domain named research.contoso.com. ... > Server computers that are configured as domain controllers. ...
    (microsoft.public.cert.exam.mcse)
  • Re: WindowsXP and RISC OS computers
    ... >> - You can however ping Nixiyo from the windows XP machine, ... > workgroup: WORKGROUP ... > Name as M$ calls it, had been changed on the centrex machine. ... > Neither icon appears in My Network Places on the centrex. ...
    (comp.sys.acorn.networking)
  • Re: Probably a very basic problem
    ... >My sisters PC uses Windows 98 ... So I tried again creating a network ... >computer and changing its workgroup name to Mshome then Home. ... >in the network neighbourhood of the computers. ...
    (microsoft.public.windowsxp.network_web)