Help with XP routing tables.

From: TC (fake_at_fake.fak)
Date: 11/19/04 

Date: Fri, 19 Nov 2004 05:30:40 GMT

Hello,

        I need help creating a routeing a perminite routing table that
survives reboots and everything. I know it's route -p add but after
that I'm lost.

My PC has 2 NICs

NIC 1
192.168.42.x subnet 255.255.255.0

NIC 2
192.168.3.x subnet 255.255.255.0

What I need is that all traffic goes though NIC 1
Unless traffic is addrss to anything on NIC 2 or NIC 1 Fails.

Can you help?

Thank you,

TC

Relevant Pages

  • Re: Event ID 1000 (Userenv) Error and Event ID 8021 (BROWSER) Error
    ... > destination route entry with the 192.168.0.1 GWY was higher priority, ... > the external network), and from there to the open Internet. ... > An additional item is that it appears that if any of the NICs in the ... > with destination addresses on the 192.168.1 subnet to get to the ...
    (microsoft.public.win2000.dns)
  • Re: Event ID 1000 (Userenv) Error and Event ID 8021 (BROWSER) Error
    ... > destination route entry with the 192.168.0.1 GWY was higher priority, ... > the external network), and from there to the open Internet. ... > An additional item is that it appears that if any of the NICs in the ... > with destination addresses on the 192.168.1 subnet to get to the ...
    (microsoft.public.win2000.networking)
  • Re: UpdatedConfirmation of NLB
    ... IP Subnet. ... It seems that you're intending the second NICs as the Heartbeat ... Configure Network Load Balancing (NLB) with Two Network Adapters ... Configure the NLB Cluster properties according to your parameters, ...
    (microsoft.public.windows.server.clustering)
  • Re: Problem using Remoting with 2 NICs
    ... I agree with you on the 2 NIC's with same subnet being a bad idea. ... Setting the http channels useIpAddress property to false on the server fixed ... I have clients connecting successfully on NIC 1, ... When both NICs are enabled. ...
    (microsoft.public.dotnet.framework.remoting)
  • Re: Third NIC
    ... Try the WAP on the switch that the SBS internal nic is connected to. ... the SBS really supports just the one subnet. ... If all 5 nics are physically in your SBS server you might as well only have one. ...
    (microsoft.public.windows.server.sbs)