Cannot get IP from DHCP
From: Scott (Scott_at_discussions.microsoft.com)
Date: 11/16/04
- Next message: Carey Holzman: "Re: SP2 killed crossover cable connection"
- Previous message: GTT: "Re: Browsers cannot connect to ezboard.com "or" sub sites of ezboard"
- Next in thread: Steve Winograd [MVP]: "Re: Cannot get IP from DHCP"
- Reply: Steve Winograd [MVP]: "Re: Cannot get IP from DHCP"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 15 Nov 2004 16:14:05 -0800
Ok all. This one has me stumped. I have a computer and a print server that I
moved from the first floor to the second floor and now will not see the
network no matter what I do. I have tested the cable runs and they test out
ok. I have used the cables I was using on the first floor and no
connectivity. I have used new cables on the second floor. no connectivity. I
have taken my laptop and plugged into both ports using the cables I have
there to use on the PC and print server and recieved a good connection and IP
on the laptop. I have changed the NIC cards on the PC and even reinstalled
both drivers for each NIC. So far I cannot get the PC nor the Print server to
connect to the network no matter what I do. Any ideas?
All ideas are welcome. Thank you in advance.
Scott
- Next message: Carey Holzman: "Re: SP2 killed crossover cable connection"
- Previous message: GTT: "Re: Browsers cannot connect to ezboard.com "or" sub sites of ezboard"
- Next in thread: Steve Winograd [MVP]: "Re: Cannot get IP from DHCP"
- Reply: Steve Winograd [MVP]: "Re: Cannot get IP from DHCP"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
