Re: share ISDN connection
From: Charlie Brown (anonymous_at_discussions.microsoft.com)
Date: 10/08/04
- Next message: WC: "Re: not ICS, but"
- Previous message: Erin: "Can't connect XP Pro to network"
- In reply to: Robert L [MS-MVP]: "Re: share ISDN connection"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 8 Oct 2004 15:43:47 -0700
Robert:
Thanks for the reply. I am familiar with ICS.
How about a non ICS method?
CB
>-----Original Message-----
>this may help. quoted from http://www.ChicagoTech.net
>How to Setup Internet Connection Sharing (ICS)
>Windows 2000 supports both Network Address Translation
(NAT) and Internet
>Confection Shading (ICS) al1ow workgroup users to access
to the Internet..
>Windows 2000/XP Professional support only ICS. Internet
Connection Sharing
>(ICS) enables a Windows (Win98SE, Win2K and XP) computer
to share its
>Internet connection with computers on local area
networks. The computer
>connecting directly to the Internet and shares its
connection with the rest
>of the computers on the network called the ICS host. In
addition, the ICS
>host provides DHCP to ICS clients. Client computers are
protected because
>they cannot be seen from outside the network. Only the
computer running ICS
>is seen from the public side.
>
>We assume you have all computers physically connected,
and the ICS host have
>two network connections: one (for example Internet in our
case) for the
>Internet such as a dial-up (PPP or ISDN), cable modem,
DSL, or other
>broadband Ethernet connection, and another one (LAN) ,
for the local area
>network.
>
>Things you should know about ICS
>
>1. When you enable Internet Connection Sharing, IP
address of the Interne
>NIC in the ICS server is always 192.168.0.1. All clients
will be assigned
>other IP addresses in the 192.168.0.x range.
>2. You should not enable ICS on the computer as a domain
controller, DHCP
>server, or DNS server.
>3. To enable ICS, you must be logged on as a member of
the Administrators
>4. You may experience some problems if you use NetMeeting
and VPN in your
>ICS network.
>5. You should have two NICs.
>
>Enabling Host ICS - WinXP
>
>To configure a WinXP ICS host, go to Start>Control
Panel>Network Connation.
>Highline the Internet which connecting to a cable modem
in our case. Under
>Network Tasks, click Change settings of this connection.
On the Advanced
>tab, select the Allow other network users to connect
through this computer's
>Internet connection check box.
>
>Configuring ICS Client
>
>To setup a win9x (in our case) as ICS client to access
the internet, you
>need to do two things. network settings and internet
option settings.
>
>1. Network settings must be set Obtain IP Address
Automatically - to do
>this, go to Network>Properties of TCP/IP.
>2. The Internet browser should se set never dial a
connection and no proxy
>server - go to Internet Options>Connection and LAN
settings.
>
>--
>For more and other information, go to
http://www.ChicagoTech.net
>
>
>Don't send e-mail or reply to me except you need
consulting services.
>Posting on MS newsgroup will benefit all readers and you
may get more help.
>
>
>Robert Lin, MS-MVP, MCSE & CNE
>
>Networking, Internet, Routing, VPN, Anti-Virus, Tips &
Troubleshooting on
>http://www.ChicagoTech.net
>This posting is provided "AS IS" with no warranties.
>
>"Charlie Brown" <anonymous@discussions.microsoft.com>
wrote in message
>news:1a2401c4ad77$9e6921a0$a301280a@phx.gbl...
>> between a Win XP Pro SP1 box, which is directly
connected
>> to the ISDN line, and a Win NT4 SP4 box.
>>
>> The 2 computers comprise my peer to peer LAN.
>>
>> Thanks.
>>
>> CB
>
>
>.
>
- Next message: WC: "Re: not ICS, but"
- Previous message: Erin: "Can't connect XP Pro to network"
- In reply to: Robert L [MS-MVP]: "Re: share ISDN connection"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
