Re: share ISDN connection
From: Robert L [MS-MVP] (noreply_at_hotmail.com)
Date: 10/08/04
- Next message: Chuck: "Re: Help with XP Network"
- Previous message: Chuck: "Re: Workgroup is not accessible"
- In reply to: Charlie Brown: "share ISDN connection"
- Next in thread: Charlie Brown: "Re: share ISDN connection"
- Reply: Charlie Brown: "Re: share ISDN connection"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 8 Oct 2004 15:53:32 -0500
this may help. quoted from http://www.ChicagoTech.net
How to Setup Internet Connection Sharing (ICS)
Windows 2000 supports both Network Address Translation (NAT) and Internet
Confection Shading (ICS) al1ow workgroup users to access to the Internet..
Windows 2000/XP Professional support only ICS. Internet Connection Sharing
(ICS) enables a Windows (Win98SE, Win2K and XP) computer to share its
Internet connection with computers on local area networks. The computer
connecting directly to the Internet and shares its connection with the rest
of the computers on the network called the ICS host. In addition, the ICS
host provides DHCP to ICS clients. Client computers are protected because
they cannot be seen from outside the network. Only the computer running ICS
is seen from the public side.
We assume you have all computers physically connected, and the ICS host have
two network connections: one (for example Internet in our case) for the
Internet such as a dial-up (PPP or ISDN), cable modem, DSL, or other
broadband Ethernet connection, and another one (LAN) , for the local area
network.
Things you should know about ICS
1. When you enable Internet Connection Sharing, IP address of the Interne
NIC in the ICS server is always 192.168.0.1. All clients will be assigned
other IP addresses in the 192.168.0.x range.
2. You should not enable ICS on the computer as a domain controller, DHCP
server, or DNS server.
3. To enable ICS, you must be logged on as a member of the Administrators
4. You may experience some problems if you use NetMeeting and VPN in your
ICS network.
5. You should have two NICs.
Enabling Host ICS - WinXP
To configure a WinXP ICS host, go to Start>Control Panel>Network Connation.
Highline the Internet which connecting to a cable modem in our case. Under
Network Tasks, click Change settings of this connection. On the Advanced
tab, select the Allow other network users to connect through this computer's
Internet connection check box.
Configuring ICS Client
To setup a win9x (in our case) as ICS client to access the internet, you
need to do two things. network settings and internet option settings.
1. Network settings must be set Obtain IP Address Automatically - to do
this, go to Network>Properties of TCP/IP.
2. The Internet browser should se set never dial a connection and no proxy
server - go to Internet Options>Connection and LAN settings.
-- For more and other information, go to http://www.ChicagoTech.net Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help. Robert Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN, Anti-Virus, Tips & Troubleshooting on http://www.ChicagoTech.net This posting is provided "AS IS" with no warranties. "Charlie Brown" <anonymous@discussions.microsoft.com> wrote in message news:1a2401c4ad77$9e6921a0$a301280a@phx.gbl... > between a Win XP Pro SP1 box, which is directly connected > to the ISDN line, and a Win NT4 SP4 box. > > The 2 computers comprise my peer to peer LAN. > > Thanks. > > CB
- Next message: Chuck: "Re: Help with XP Network"
- Previous message: Chuck: "Re: Workgroup is not accessible"
- In reply to: Charlie Brown: "share ISDN connection"
- Next in thread: Charlie Brown: "Re: share ISDN connection"
- Reply: Charlie Brown: "Re: share ISDN connection"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
