help please

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Akkad (anonymous_at_discussions.microsoft.com)
Date: 09/13/04 

Date: Mon, 13 Sep 2004 01:32:05 -0700

Dear Experts,

i have a home network , when i unplug the network cable
and turn on my
computer , and log on to win xp , it tells me the network
cable is unplugged
, when i plug the cable into the network card it doesn't
tell me lan is now
connected , network is active but the icon in the task
bar doesn't refresh
it's status , and when i log into winxp with unplugged
cable , the mapped
network drivers in my computer shows that every map drive
is connected , it's
supposed to tell me couldn't connect to all network
drivers, and show the
disconnected network drive on the mapped drives.

Regards

Relevant Pages

  • Re: SBS 2003 SP1 installation seems to be stuck in loop
    ... > All those errors are related to the fact that you unplugged the network ... I have removed the line in our document where you were told to unplug ... ISetupDataFile::GetPropertyValuefailed for account information in ... licensing link with error. ...
    (microsoft.public.windows.server.sbs)
  • RE: sasser
    ... Unplug this system from the network. ... This will stop the system from rebooting long enough for you to download the MS04-011 patch and the cleaner tool. ...
    (microsoft.public.security.virus)
  • Re: SBS 2003 SP1 installation seems to be stuck in loop
    ... All those errors are related to the fact that you unplugged the network ... SBS acts really weird when the Lan nic does not have a device ... What you should do is check the event logs for errors after a clean boot. ... I have removed the line in our document where you were told to unplug ...
    (microsoft.public.windows.server.sbs)
  • Re: Effectiveness of Severing Network Connection to Protect a Computer From Attack
    ... "disconnect" on each network connection in the control panel, ... might try to disconnect the network connections in the control panel. ... the attacker can't do that if you physically unplug the cables. ...
    (microsoft.public.win2000.security)
  • RE: "Network cable is unplugged" with a twist
    ... Now go to your network connections and remove them. ... make sure that you unplug the NIC during this process and only ... > My wife and I both hook up to a linksys router. ... > unplugged" on her onboard network connection. ...
    (microsoft.public.windowsxp.hardware)