Re: ICS in SP2
From: Txl (nobody_at_nowhere.com)
Date: 09/06/04
- Next message: mlrbkr: "Internet connection problems"
- Previous message: yesi: "Net Printers Net use command"
- In reply to: Txl: "Re: ICS in SP2"
- Next in thread: Feng Mao: "Re: ICS in SP2"
- Reply: Feng Mao: "Re: ICS in SP2"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 06 Sep 2004 15:34:54 +0200
I've narrowed down the problem...
When I set the bridge IP to 192.168.0.2 it seems to hold on, here's the
ipconfig /all
Configuration IP de Windows
Nom de l'hôte . . . . . . . . . . : jc
Suffixe DNS principal . . . . . . :
Type de noud . . . . . . . . . . : Inconnu
Routage IP activé . . . . . . . . : Non
Proxy WINS activé . . . . . . . . : Oui
Carte Ethernet Pont réseau (Pont réseau):
Suffixe DNS propre à la connexion :
Description . . . . . . . . . . . : Miniport de pont MAC
Adresse physique . . . . . . . . .: 12-6A-60-E0-81-68
DHCP activé. . . . . . . . . . . : Non
Adresse IP. . . . . . . . . . . . : 0.0.0.0
Masque de sous-réseau . . . . . . : 0.0.0.0
Passerelle par défaut . . . . . . :
Carte Ethernet RJ45:
Suffixe DNS propre à la connexion :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit
Ethernet
Adresse physique . . . . . . . . .: 00-0C-76-96-5A-F2
DHCP activé. . . . . . . . . . . : Non
Adresse IP. . . . . . . . . . . . : 192.168.0.54
Masque de sous-réseau . . . . . . : 255.255.255.0
Passerelle par défaut . . . . . . :
When i go to the internet connection and enable the share it wants to set
the IP to 192.168.0.1 (normal) but it fails and gives me an IP on 0.0.0.0,
here's the ipconfig /all results AFTER enabling ICS
Configuration IP de Windows
Nom de l'hôte . . . . . . . . . . : jc
Suffixe DNS principal . . . . . . :
Type de noud . . . . . . . . . . : Inconnu
Routage IP activé . . . . . . . . : Non
Proxy WINS activé . . . . . . . . : Oui
Carte Ethernet Pont réseau (Pont réseau):
Suffixe DNS propre à la connexion :
Description . . . . . . . . . . . : Miniport de pont MAC
Adresse physique . . . . . . . . .: 12-6A-60-E0-81-68
DHCP activé. . . . . . . . . . . : Non
Adresse IP. . . . . . . . . . . . : 0.0.0.0
Masque de sous-réseau . . . . . . : 0.0.0.0
Passerelle par défaut . . . . . . :
Carte Ethernet RJ45:
Suffixe DNS propre à la connexion :
Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit
Ethernet
Adresse physique . . . . . . . . .: 00-0C-76-96-5A-F2
DHCP activé. . . . . . . . . . . : Non
Adresse IP. . . . . . . . . . . . : 192.168.0.54
Masque de sous-réseau . . . . . . : 255.255.255.0
Passerelle par défaut . . . . . . :
So it seems like a problem for him to change IP to 192.168.0.1, if I set
it manually upon reboot it comes back to 0.0.0.0
What can i try to correct this ?
thanks a lot
- Next message: mlrbkr: "Internet connection problems"
- Previous message: yesi: "Net Printers Net use command"
- In reply to: Txl: "Re: ICS in SP2"
- Next in thread: Feng Mao: "Re: ICS in SP2"
- Reply: Feng Mao: "Re: ICS in SP2"
- Messages sorted by: [ date ] [ thread ]