Re: XP Logon to Server 2003 Stall

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Ron Lowe (ron-msng_at_{d.e.l.e.t.e.}lowe-family.me.uk)
Date: 08/25/04


Date: Wed, 25 Aug 2004 20:25:22 +0100


"ComputerGuy" <ComputerGuy@discussions.microsoft.com> wrote in message
news:267E8988-0A07-4684-8CF3-9F628508DD2D@microsoft.com...
>I have a hotel with a small network hosting an online reservation system
> through Server 2003. When the client machines logon to the Domain there
> will
> be a 3-5 minute delay where the OS will look like it is frozen at
> "Applying
> Personal Serttings" or "Applying Computer Settings." I have installed SP2
> on
> all systems, which the knowledge base article said would solve that
> problem.
> However, I am still having this problem and am looking for advice.
>
> Thanks
> Nick Matlach
> The Computer Guys
> St. Augustine, FL

This usually indicates a DNS problem.

XP differs from previous versions of windows in that it uses
DNS as it's primary name resolution method for finding domain
controllers:

How Domain Controllers Are Located in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314861

If DNS is misconfigured, XP will spend a lot of time waiting for it to
timeout before it tries using legacy NT4 sytle NetBIOS.
( Which may or may not work. )

1) Ensure that the XP clients are all configured to point to the local
   DNS server which hosts the AD domain. That will probably be the
   win2k server itself.
   They should NOT be pointing an an ISP's DNS server.
   An 'ipconfig /all' on the XP box should reveal ONLY the domain's
   DNS server.

   ( you should use the DHCP server to push out the local DNS server
   address. )

2) Ensure DNS server on win2k is configured to permit dynamic updates.

3) Ensure the win2k server points to itself as a DNS server.

4) For external ( internet ) name resolution, specify your ISP's DNS server
   not on the clients, but in the 'forwarders' tab of the local win2k DNS
server.

On the DNS server, if you cannot access the 'Forwarders' and 'Root Hints'
tabs because they are greyed out, that is because there is a root zone (".")
present on the DNS server. You MUST delete this root zone to permit the
server to forward unresolved queries to yout ISP or the root servers:

HOWTO: Remove the Root Zone (Dot Zone)
http://support.microsoft.com/default.aspx?kbid=298148

The following articles may assist you in setting up DNS correctly:

Setting Up the Domain Name System for Active Directory
http://support.microsoft.com/default.aspx?scid=kb;en-us;237675
HOW TO: Configure DNS for Internet Access in Windows 2000
http://support.microsoft.com/default.aspx?scid=kb;en-us;300202

-- 
Best Regards,
Ron Lowe
MS-MVP Windows Networking


Relevant Pages

  • Re: Cannot get access to router on SBS server
    ... point the DNS server setting to the IP of the SBS ... calling CNetCommit::ValidateFulltimeConnectionProperties. ... Call to Reading web publishing selection returned ok. ...
    (microsoft.public.windows.server.sbs)
  • Re: Herb Martin...Global Catalog SRV record missing!
    ... Error: Root hints list has invalid root hint server: ... DNS server: 128.63.2.53 ... PTR record query for the ...
    (microsoft.public.windows.server.dns)
  • Re: Network connections gets disconnected
    ... I have tried different brand firewall router also yesterday. ... server IP as the DNS Server but still having same problem.... ... AD clients MUST point to the DNS ... Do not put your ISP's DNS server *anywhere* on an AD client. ...
    (microsoft.public.win2000.networking)
  • Re: Can Internet Computers see my private address DNS server?
    ... I have not placed any of our computers in the NAT router's DMZ. ... It is my intent, eventually, to turn the client with the Win Server 2003 ... and there are 6 clients. ... address is entered in the Alternate DNS server: ...
    (microsoft.public.windows.server.dns)
  • Re: Can Internet Computers see my private address DNS server?
    ... To let your DNS server resolve these external names I typically just ... I would recommend using your 2003 server to perform your DHCP. ... and there are 6 clients. ... In the DNS server dialog box, I have entered my Internet Service ...
    (microsoft.public.windows.server.dns)