Re: Unable to configure internet conn sharing using SMC switch
From: Bellave Jayaram (BellaveJayaram_at_discussions.microsoft.com)
Date: 08/16/04
- Next message: Hans-Georg Michna: "Re: Network Setup Problems"
- Previous message: Hans-Georg Michna: "Re: Problems with file sharing"
- In reply to: Steve Winograd [MVP]: "Re: Unable to configure internet conn sharing using SMC switch"
- Next in thread: Steve Winograd [MVP]: "Re: Unable to configure internet conn sharing using SMC switch"
- Reply: Steve Winograd [MVP]: "Re: Unable to configure internet conn sharing using SMC switch"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 16 Aug 2004 11:41:01 -0700
"Steve Winograd [MVP]" wrote:
> In article <C180A51E-2BE5-4D7E-B106-341935271974@microsoft.com>,
> Bellave Jayaram <BellaveJayaram@discussions.microsoft.com> wrote:
> >Steve,
> >
> >Good News. I have finally managed to set up ICS by adding a network
> >bridge and enabling the wireless card for sharing. Now I need to figure
> >out if it is possible to set up the print server.
> >Thank you again for your help.
> >
> >Jayaram
>
> You're welcome, Jayaram.
>
> I'm puzzled by your message. You can either enable sharing on the
> wireless card OR add a network bridge, but you can't do both. Windows
> XP won't let you share a bridged connection. Which one did you do?
>
> I recommend using the network bridge if it will work. If the network
> bridge won't work, then enable ICS on the wireless connection, which
> will give Internet access to another computer that connects to the
> wired connection.
>
> To enable ICS on a network connection:
>
> 1. Right-click the connection.
> 2. Click Properties.
> 3. Click Advanced.
> 4. Put a check mark in the box for Internet Connection Sharing.
> --
> Best Wishes,
> Steve Winograd, MS-MVP (Windows Networking)
>
> Please post any reply as a follow-up message in the news group
> for everyone to see. I'm sorry, but I don't answer questions
> addressed directly to me in E-mail or news groups.
>
> Microsoft Most Valuable Professional Program
> http://mvp.support.microsoft.com
>
I meant that in the properties settings for the wireless connection, I
checked
"share this computer's internet connection with other computers" and I
created
a network bridge between the LAN connection and the wireless connection. I
set the IP address of the network bridge to 192.168.0.1 since after creating
the
bridge, it had an IP starting with 169.
Jayaram
- Next message: Hans-Georg Michna: "Re: Network Setup Problems"
- Previous message: Hans-Georg Michna: "Re: Problems with file sharing"
- In reply to: Steve Winograd [MVP]: "Re: Unable to configure internet conn sharing using SMC switch"
- Next in thread: Steve Winograd [MVP]: "Re: Unable to configure internet conn sharing using SMC switch"
- Reply: Steve Winograd [MVP]: "Re: Unable to configure internet conn sharing using SMC switch"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|