Media Disconnected.

anonymous_at_discussions.microsoft.com
Date: 08/02/04 

Date: Mon, 2 Aug 2004 03:37:10 -0700

if this is a cable connecting 2 computers directly (NIC
to NIC)then make sure you are using a "crossover" cable,
not an inline patch cable. If you are already, or if
going thru a switch/hub/router - it could be a bad cable -
 try a replacement one
Give us a little more info about your network / equipment
and what you are trying to do.
>-----Original Message-----
>The system has 'Network cable unplugged', but the cable
is seated firmly. Chkd the ethernet card driver.
Installed properly. When checked the IPCONFIG settings,
cust had 'Media Disconnected'. I would like to know if
this is a problem with the NIC card or with the Software.
>.
>