Re: Can not connect or get network DCHP DNS IP on 1 computer other

From: alejandro (SOS_at__hotmail.com)
Date: 07/29/04


Date: Thu, 29 Jul 2004 10:13:11 -0400

I am having the same problem with two computers

any solution??

"iss1ara" <iss1ara@discussions.microsoft.com> wrote in message
news:7F2634C5-9C1C-4E21-8F4A-BE07F7F8B22A@microsoft.com...
> I am having the exact same problem and appears to have started on Monday
this week as well. I hope someone reads this and can provide some
assistance.
>
> "ccchiro" wrote:
>
> > I also would like to add there is not hardware firewall and the winXP
firewalls are set to off.
> >
> > "ccchiro" wrote:
> >
> > > HELP! Here is the problem: I have 3 computers all connected to a HUB
and then the HUB uplinks to a DSL router. My best/newest computer suddenly
stopped being able to "see" the network Monday morning. It was working fine
Sunday night, I shut down and then it would not work on Monday morning when
I powered up. The other 2 computers work fine. The "broken" computer runs
fine with exception that it cannot browse the intranet/local network (can
not access the other computers shared folders). It refuses to get a DHCP or
DNS. Basically it is acting as if the network card went bad but..when I plug
the cable into the HUB it reports it is connected and the light flashes on
the HUB as if it were sending tons of information (like when first booting,
Dling or playing a game - constant flicker). It never reports receiving any
packets via Ethernet connection and keeps flashing as long as it is plugged
in. I can access the internet via dial up and it works fine. Here is what I
have tried, all of which did NOT fix it:
> > >
> > > Specs: AMDathlon3000XP nForce2 MB, with onboard Ethernet, 1gigRAM.
> > >
> > > 1. Direct connection to Router (can't be a router issue as the other 2
work AND I can't get it to even access the local network through the HUB).
HUB is a simple network switch with no firewall.
> > > 2. New cable/different cables, tried all HUB ports.
> > > 3. Unplugged a working cable set up and plugged it into non-working
computer.
> > > 4. Clean/new install of Windows XP - not an upgrade - overwrote old
WinXP (and reinstalled all updates via dial-up) and tried 1-3 again
including the latest signed nForce MB drivers (which worked fine before
Monday).
> > > 5. Installed a new Ethernet network card (disabled onboard in windows
and in BIOS). Even tried the supplied drivers with the new card vs. the
windowsXP drivers and tried 1-3 again. Windows reports Ethernet is enabled
and working via device manager (it did with onboard also).
> > > 6. Ran every know virus program including sasser/blaser/stinger/Klez
tools AND a tech support online version of Norton Antivirus (no viruses).
Plus, it seems counter productive for a virus which propagates via internet
to block internet access anyway.
> > > 7. Ran Adaware/spybot.
> > > 8. Reset BIOS to default (removed and replaced battery)
> > > 9. IPCONFIG will not renew (times out), it stays "stuck" on a widows
IP address.
> > > 10. Confirmed all computers have the Windows firewall disabled.
> > >
> > > Everything EXCEPT the network works normally. After trying numerous
things via Tech support for computer company (IBUYPOWER.COM), they are
sending me a new MB (7 days left on warranty with onsite service LOL). Do
you think it can be the MB?
> > >
> > > HELP if you can please.
> > >
> > > Update after reading more...
> > >
> > > Tried the Winsock XP Fix but did not fix problem.
> > > Tried another new network card just in case..no help
> > > Still can not get this one computer to get the DCHP/DNS/IP
automatically from the DSL ISP, even if it is connected directly to the
router (others do this fine).
> > >
> > > ThanX Dr. W



Relevant Pages

  • Re: Printer Sharing XP Home w/ SP2
    ... network router from Linksys or Netgear costs less than $50. ... If there's a hub in place that's providing shared internet access ...
    (microsoft.public.windowsxp.network_web)
  • Re: Home or Professional version
    ... No computer is host for a network, so the 5 or 10 active connections limit ... > the DSL modem connects to the router. ... All the computers have Internet ... >> Is the DSL modem connected to a hub or a computer? ...
    (microsoft.public.windowsxp.general)
  • Re: Network Wizard is unable to find my network hardware
    ... You need to download and install the correct drivers for your network card ... plugged into a hub which communicates with the internet. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Why isnt it secure??
    ... My connection type is adsl, I have dsl ethernet modem(Corecess 3113 ethernet ... connection from the hub. ... all the computers has been installed norton internet security(beacuse there ... >>I had two computers before this week and had no problems on my network. ...
    (microsoft.public.windowsxp.network_web)
  • Re: TCP/IP Not Authorized
    ... When I connect the laptop to my internet access point the ... No drivers installed. ... I have checked the network adapter and the 1394 Network adapter is ... them to CD and then use them to install the Ethernet card and driver support ...
    (microsoft.public.windowsxp.help_and_support)