Re: Access Denied
From: Bob (anonymous_at_discussions.microsoft.com)
Date: 07/26/04
- Next message: Eric: "Stubborn file permission questions"
- Previous message: anonymous_at_discussions.microsoft.com: "Re: My computer connects via dial-up, but..."
- In reply to: melnick: "Re: Access Denied"
- Next in thread: Mary: "RE: Access Denied"
- Messages sorted by: [ date ] [ thread ]
Date: Sun, 25 Jul 2004 22:44:41 -0700
Well, I had some partial success. The newer Pentium
computer finally reconized the older AMD Athlon on the
network and I could access it successfully. The AMD
Athlon, however, still comes up with the Access Denied
message.
I did a complete reformat of the HD on the AMD Athlon
today and set up the protocols, the same as was on the
newer Pentium. The Pentium is running Service Pack 2
while the AMD Athlon remains with Microsoft Service Pack
1.
Not sure where the problem is. Firewall on the Pentium
blocking the AMD Athlon or something in the AMD Athlon
not wanting to connect through to the newer computer.
Partial success is better than no success at all.
Bob
>-----Original Message-----
>Add IPX protocol - don't know why it solves the problem
but it does.
>
>--
>Marty
>"Chuck" <none@example.net> wrote in message
>news:uv86g0hl332f63tj67nam1ql53uhhqdnuk@4ax.com...
>> On Sat, 24 Jul 2004 18:39:02 -0700, "Bob"
>> <anonymous@discussions.microsoft.com> wrote:
>>
>> >
>> >>-----Original Message-----
>> >>On Sat, 24 Jul 2004 15:21:59 -0700, "Bob"
>> >><anonymous@discussions.microsoft.com> wrote:
>> >>
>> >>>I have trying for six weeks to set up a network
through
>> >a
>> >>>Linksys hub with two computers using Windows XP Home
>> >>>Edition. I formerly used Windows 98 SE without a
>> >hitch.
>> >>>Networked and shared printers perfectly.
>> >>>
>> >>>The two computers reconize each other as listed in
the
>> >>>computers on the the network however when I click on
>> >the
>> >>>other computer, I keep getting a message:
>> >>>
>> >>>Computer is not accessible. You might not have
>> >permission
>> >>>to use this network resource. Contact the
administrator
>> >>>of this server to find out if you have access
>> >permissions.
>> >>>Access denied.
>> >>>
>> >>>Well I am the administrator of both computers. I'm
>> >>>starting to hate XP as 98 SE was by far the best
>> >>>Operating system Mr. Gates ever produced.
>> >>>
>> >>>Any clues how to get around this message? Thanks.
>> >>
>> >>Bob,
>> >>
>> >>Make sure the browser service is running on each
>> >computer. Control
>> >>Panel - Administrative Tools - Services. Verify that
>> >the Computer
>> >>Browser service is started.
>> >>
>> >>For XP Home, make sure that the Guest account is
>> >enabled, on each
>> >>computer. Simple File Sharing provides shares ONLY
thru
>> >the Guest
>> >>account.
>> >>
>> >>Do any of the computers have a software firewall
(ICF or
>> >third party)?
>> >>If so, you need to configure them for file sharing,
by
>> >opening ports
>> >>TCP 139, 445 and UDP 137, 138, 445, and / or by
>> >identifying the other
>> >>computers as present in the Local (Trusted) zone.
>> >Firewall
>> >>configurations are a very common cause of (network)
>> >browser, and file
>> >>sharing, problems.
>> >>
>> >>Cheers,
>> >>Chuck
>> >>Paranoia comes from experience - and is not
necessarily
>> >a bad thing.
>> >>.
>> >
>> >Hi Chuck,
>> >
>> >Thanks for your message. I have turned on the Guest
>> >Account for both computers. They were both inactive.
>> >
>> >I checked the Browser service and this was active on
both
>> >computers.
>> >
>> >I have a firewall on the new Pentium 4 3:00 GHz
computer.
>> >I'm running McAfee Firewall Network filter which is
>> >checked in the Local Area Connection Properties Box.
I'm
>> >also running Windows XP Service Pack 2 (Beta) which
has
>> >its own new firewall that you can manually manage.
This
>> >by the way, was just installed.
>> >
>> >How do you access the local trusted zone in XP? I
assume
>> >through the Control Panel Internet Options however I
>> >haven't found what I need there. The other option is
to
>> >open the various ports you mentioned. How do you
>> >reconfigure your ports in Windows XP?
>> >
>> >Appreciate your help. Thanks, Chuck.
>> >
>> >Bob
>>
>> Hi Bob,
>>
>> You have three possible problems:
>> - File sharing
>> - ICF (SP2 version)
>> - McAfee PF
>>
>> I would suggest you start by disabling both ICF and
McAfee, until you
>> get file sharing (Guest accounts etc) working
otherwise. Then enable
>> ICF, and configure it. Finally, enable MPF, and
configure it. Work
>> on, and resolve, one problem at a time.
>>
>> WRT configuring ICF and MPF, you may want to consult
the documentation
>> for each. I don't have access to my SP2 test computer
right now. And
>> I've not yet tested MPF, so I can't say with authority
how you
>> configure that either.
>>
>> I simply know from experience that personal firewalls
have to be
>> configured so other computers on the Local LAN segment
are trusted.
>> But you should not open the required ports, to enable
file sharing,
>> for all computers.
>>
>> Cheers,
>> Chuck
>> Paranoia comes from experience - and is not
necessarily a bad thing.
>
>
>.
>
- Next message: Eric: "Stubborn file permission questions"
- Previous message: anonymous_at_discussions.microsoft.com: "Re: My computer connects via dial-up, but..."
- In reply to: melnick: "Re: Access Denied"
- Next in thread: Mary: "RE: Access Denied"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
