RE: Issue with getting small network going...

From: qzxcvbn (qzxcvbn_at_discussions.microsoft.com)
Date: 07/01/04


Date: Thu, 1 Jul 2004 12:03:02 -0700

Hi it looks like one of your other PC's as an IP address of 192.168.0.1 which is the IP adress for ICS you will need to find out which one it is then change it to something like 192.168.0.3

"Doom59" wrote:

> I posted this before but I dont think Ill get more posts
> since its already pages away. Here is the posting as of
> now, and thanks, sorry for reposting it but I wasnt sure
> why it didnt go to the top after new posts came along:
>
>
> OK, thank you very much for your help here, looks like I
> will get the problem solved, but Im stuck at this line:
> Select use DHCP on this page now, click ok
> Where is this option? Here is what I see under TCP/IP
> and under the advanced tab, where it says DHCP is
> enabled. At this point, it still has the IP address
> conflict that wont allow me to turn on ICS.
> http://img26.photobucket.com/albums/v78/Stunna7516/error.j
> pg
>
> >-----Original Message-----
> >Easy one this fortunatly, it looks like your network
> card that works (lan) has allready go the addres
> 192.168.0.1 manually assigned to it, however ICS NEEDS
> this address to configure itself. Easiest way to solve
> this is to change the ip address of the Lan car to
> something else. However if the lan card also needs this
> address then you can......
> >
> >view the tcp properties for the lan card (lan /
> properties / tcpip) and make a note of them so you can
> use them later.
> >
> >Select use DHCP on this page now, click ok
> >
> >now enable ICS by going properties / advanced / share my
> connection / select the wifi card for the lan adapter,
> click ok
> >
> >ICS will now be installed on that card, go properties,
> tcpip for the wifi card, notice how it's setup for
> 192.168.0.1/255.255.255.0, change this to
> 192.168.1.1/255.255.255.0 OK out
> >
> >Slect the lan card and reset the settings.
> >
> >Now on the computer you want to use the shared
> connection with goto the wifi cards properties/tcpip, and
> setup it up manually for ip 192.168.1.2/255.255.255.0
> with default gateway of 192.168.1.1 and dhcp address of
> 192.168.1.1 and it should work.
> >
> >Hope that helps
> >
> >Ashleigh
> >
> >"Doom59" wrote:
> >
> >> My setup is this:
> >> CABLE MODEM > NETGEAR WIRELESS ROUTER > PC A WIRELESS
> CARD
> >> I want my PC A to be able to have internet connection
> sharing enabled, using the wireless connection to the
> internet to connect another computer with the lan port.
> >>
> >> In an effort to get internet connection sharing
> enabled, I run the home and small office network setup
> wizard in XP. Everything is fine until the last screen,
> and this pops up where it should say success:
> >>
> http://img26.photobucket.com/albums/v78/Stunna7516/cannotc
> omplete.jpg
> >> It doesnt tell me a single thing about the problem.
> >>
> >> Another thing Ive tried is via network connections
> right clicking my wireless connection and turning on ics
> under advanced. This is the error I get:
> >>
> http://img26.photobucket.com/albums/v78/Stunna7516/network
> connections.jpg
> >> When I enabled it under the lan, it works but I lose
> my internet connection, probably because it thinks it
> should be coming from the lan or maybe something else.
> >>
> >> Is there another way to enable ICS between my wireless
> card and lan, or figure out why Im getting these two
> errors?
> >.
> >
> ..
>
>
>



Relevant Pages

  • Issue with getting small network going...
    ... conflict that wont allow me to turn on ICS. ... this is to change the ip address of the Lan car to ... However if the lan card also needs this ... connection / select the wifi card for the lan adapter, ...
    (microsoft.public.windowsxp.network_web)
  • RE: When running network setup I get cannot
    ... Select use DHCP on this page now, ... this is to change the ip address of the Lan car to ... However if the lan card also needs this ... connection / select the wifi card for the lan adapter, ...
    (microsoft.public.windowsxp.network_web)
  • Re: 2 pc-s LAN linux and win xp???
    ... > to ethernet card via a cable ... > Connection is DSL with Win XP, the other PC was using 98SE, but I ... > MINIPORT PPPOE),l how can I link my Knoppix PC with the LAN? ...
    (Debian-User)
  • ICS questions and confusion
    ... the Internet connection, the Advanced tab of the connection has the ICS ... which is the connection THROUGH which the "other network ... and I know that it's given to the LAN ...
    (microsoft.public.windowsxp.network_web)
  • HP9000/827S
    ... I checked the card to make sure it was jumpered for INT ... connected to a 10base2/10baseT media converter. ... connected to the LAN. ... just need to establish a terminal connection, ...
    (comp.sys.hp.hpux)

Quantcast