Client cannot access net through lan with ICS enabled

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: belvedere (belvedere.12uooz_at_pcbanter.net)
Date: 03/09/04 

Date: Tue, 09 Mar 2004 12:10:15 GMT

I Have 2 WINXP PC's connected with a crossover cable, a NIC in each. The
lan is setup and works correctly.

The LAN TCP/IP settings on the host are IP: 192.68.0.1 subnet mask
255.255.255.0. IEEE enabled, MS client, MS file & printer sharing,
TCP/IP, and QoS protocols all installed.

On the Client, IP: 192.168.0.2, subnet mask: 255.255.255.0,
gateway:192.168.0.1, DNS: as specified by ISP.

The Dialup connection has ICS enabled, IP& DNS are obtained
automatially. network is allowed to use this connection to connect to
the internet.

client Internet explorer has no check boxes checked under LAN settings,
and is set to never dial a connection.

The Client used to have WIN2K but I upgraded it to XP after I gave up
fixing it (same problem as now)

So now I have a problem still that the client computer will not access
the net through the host, even after enabling the famed ICS.

I tried using wingate but it wouldnt install. SyGate on the client
refuses to connect to the host.

Its like the client has decided that it just doesnt want to have the
internet.

someone please help. 

--
belvedere
------------------------------------------------------------------------
posted via www.PCBanter.net

Relevant Pages

  • IE Problem or SpyWare Problem or neither ?
    ... Up until recently I had a perfectly good functioning LAN & internet ... connection between my 2 PCs. ... access the internet via LAN from the Client PC!! ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • IP Address Problem or SpyWare?
    ... Up until recently I had a perfectly good functioning LAN & internet ... connection between my 2 PCs. ... access the internet via LAN from the Client PC!! ...
    (microsoft.public.win2000.networking)
  • Strange Pattern Resulting from SQLsnake Probes
    ... Provides DHCP and RRAS/NAT Internet access to the LAN (file sharing, Client ... It's also a file server. ... smtp, pop, nntp, ntp, and echo outgoing connection requests. ...
    (microsoft.public.win2000.security)
  • Re: Terminal Service on 2KServer Odd connection problem.
    ... There might be a black hole router between your client and the TS, ... of the permanent TS CAL to the client (on first connection, ... permanent license). ... > lan I can't connect. ...
    (microsoft.public.win2000.termserv.clients)
  • [PATCH 0/5] [RFC] AF_RXRPC socket family implementation [try #3]
    ... These patches together supply secure client-side RxRPC connectivity as a Linux ... kernel socket family. ... presentation side is left to the client. ... Each connection goes to a particular "service". ...
    (Linux-Kernel)