Re: code 10

Hi Byte

Thanks for the response.I have done the following.


4. Click Device Manager. The Socket Serial Card should show in the "Ports
(COM & LPT)" category. *If it has a "+" next to it, click it once so it
becomes a "-" and the card should show right below it
5. Double-click on the description; this will open the cards properties
6. Click on "Resources"
7. Click "Set configuration manually". This should assign an I/O range.
Make
sure there are no conflicts reported in the "Conflicting device list".
Your
IRQ should show with a "?" over it

Under Resoursces, I have Use Automatic Setting which I have unchecked, does
this mean I have "Set configuration manually"?

For my COM1 my I/O range is 03F8-03FF & IRQ is 04 and 02F8-02FF for COM2
with IRQ03,and both indicate No conflicts.

8. Double-click on "IRQ". This will come up with a value for you. Make
sure
it does not show a conflict and then click OK

When I do that I get error 'You cannot modify the resources in this config.
Try choosing a different config. in the 'Setting Based On' box. My box
indicates Current configuration (as it is now) and Basic configuration 0000
to 0004. I have played about different configs given in the box but nothing
seemed to work.

*If the software you are going to be using with the serial card has
specific
resource requirements, please contact us and we will provide you with the
required settings. You will know if this is the case if it does not work
after you have set the resources manually.
(Reference Page: http://www.socketcom.com/support/support_sio
Hope this helps.

I haven't the vaguest what this is all about! Pl advice.

Menikos



.

Relevant Pages

  • Re: error RC2135 : file not found: filename.tlb
    ... using macros (the error is generated when compiling a ... copying it from the working configuration. ... Under the Resources tree, ... And we're specifying the intermediate directory ...
    (microsoft.public.dotnet.languages.vc)
  • Re: Strange device init
    ... >>The device doesn't get its resources configured properly. ... On other laptops the configuration is done via ... Finally have you checked if PnPBIOS detects the device? ... _PRS and _CRS at least returns the proper resources that should be used. ...
    (Linux-Kernel)
  • Re: Abolute path of argv[0]
    ... There is no good reason to do ... | It -seems- like all configuration files live in etc for a system so ... do correct me if I'm wrong as I'm a Linux Noob ... resources outside the actual executable file itself. ...
    (comp.os.linux.development.apps)
  • Re: Localization - Dialog resource fails to load
    ... resources configuration. ... For all the languages, but german, everything works good. ... The DLL seems to build OK ... >>> This project also has a different build configuration for each language. ...
    (microsoft.public.vc.mfc)
  • Re: code 10
    ... with Crystal WDM, so that puts me at a dead end. ... Click "Set configuration manually". ... sure there are no conflicts reported in the "Conflicting device list". ... When I do that I get error 'You cannot modify the resources in this config. ...
    (microsoft.public.windowsxp.music)