Re: Failure To Recognize DV Camera

And the saga continues. I have a new working Firewire cable and I know the
Sony DVC is operating as I connected it to another PC and the device was
recognized. When I connected the Sony to the IEEE 1394 port on my PC (Dell
XPS 210) it was not recognized. The device does not appear under Imaging
Devices in Device Manager. Under the heading IEEE 1394 Bus Host Controller
is shown Texas Instrument OHCI Compliant IEEE 1394 Host Controller with NO
Yellow warning icon. Device Manager says it is working correctly. (I am now
running WinXP Media Edition SP3 but same thing occurred under SP2.) Advice,
please.

--
....A cynic does not read bitter lessons from the past; he is prematurely
disappointed in the future...
"LVTravel" <noone@xxxxxxxxxxx> wrote in message
news:%237zPzXk3IHA.3544@xxxxxxxxxxxxxxxxxxxxxxx
Hope you get it working. Let us know what you find out and if you still
can't get it working write back and we will all try to help..


"Harry Williams" <dramat@xxxxxxxxxx> wrote in message
news:%23iZ97uh3IHA.3624@xxxxxxxxxxxxxxxxxxxxxxx
Thank you for all the good info and links. I'll check everything out and
let you know. BTW, I just updated from SP2 to SP3 and the PC still
doesn't recognize the DV camera.

Interestingly enough, I recently connected my Sony DV camera through an
IEEE 1394 device on another PC (running SP2) and everything worked very
well. I'm now 8000 miles away from that PC and the cable I used so I'll
have to do the whole troubleshooting process. Anyway, thanks again.

Harry

--
...A cynic does not read bitter lessons from the past; he is prematurely
disappointed in the future...
"Graham Hughes" <graham.hughes@xxxxxxxxxxxxxxxxxxx> wrote in message
news:eM1jcYc3IHA.5112@xxxxxxxxxxxxxxxxxxxxxxx
Never trust anything a brand new cable can be faulty as can a 10 year
old one which worked yesterday.

You must test all the components with ones you can see working in front
of your eyes, so beg/steal/borrow a cam/pc and cable.

Again, Device manager will tell you if the firewire port is error free
in connection etc, but not error free physically.

http://www.myvideoproblems.com/ProblemPages/CannotCapture.htm

--

Graham Hughes
MVP Digital Media
www.myvideoproblems.com


"Harry Williams" <dramat@xxxxxxxxxx> wrote in message
news:eqWb3VV3IHA.2348@xxxxxxxxxxxxxxxxxxxxxxx
Yes to all you said. There is no error indicator under the IEEE 1394
Bus host controller. Device manager says device is working properly.
Cable is brand new (Belkin).

-------------------------...A cynic does not read bitter lessons from
the past; he is prematurely disappointed in the future...

"LVTravel" <noone@xxxxxxxxxxx> wrote in message
news:u2yn3jU3IHA.1196@xxxxxxxxxxxxxxxxxxxxxxx

"King Harry" <bitterbrush@xxxxxxxxxxxxx> wrote in message
news:C95E83CA-032B-4F11-A27F-3B764D5F50D4@xxxxxxxxxxxxxxxx
For a reason unknown to me, I am unable to import digital video from
my Sony
DCR-PC9. I connect to my PC from The camera via a Firewire
(IEEE1394), 6 pin
to 4 pin. I am using WinXpMedia Edition. Keep getting on-screen
message that
the input device cannot be found. Any ideas?

Thanks
--
Against stupidity even the Gods themselves battle in vain.

Lets look at the obvious first. Camera turned on and in playback
mode? Absolutely sure the cable is good and plugged in all the way?
Can you see the Firewire card/adaptor in Device manager under "IEEE
1394 Bus host controllers" without any error indication (yellow !)?











.

Relevant Pages

  • Re: Failure To Recognize DV Camera
    ... The Sony DVC is a known working device. ... the Firewire port so I wouldn't have found out that it was faulty. ... While I have never had a Firewire port go bad I have had USB ports have ... connection was made but if I released the connector the connection would ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: Failure To Recognize DV Camera
    ... since the Sony DVC is recognized by another WinXP ... Firewire port so I wouldn't have found out that it was faulty. ... connection was made but if I released the connector the connection would ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: Failure To Recognize DV Camera
    ... the Firewire port so I wouldn't have found out that it was faulty. ... While I have never had a Firewire port go bad I have had USB ports have ... connection was made but if I released the connector the connection would ... Imaging Devices in Device Manager. ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: Sony DV camcorder not recognised
    ... You do not have the ieee1394 bus host controller listed in device manager? ... as the firewire card is not being recognised. ... >>firewire connection in device manager? ...
    (microsoft.public.windowsxp.video)
  • Re: cant capture from sony mini dv
    ... I believe I have found what I need to do to allow the use of the firewire ... connection, but still do not have success in transferring the video. ... > There are no conflicts shown in device manager. ... >> After connecting can you see the cam in device manager listed as a sony cam? ...
    (microsoft.public.windowsxp.video)
Loading