Re: Failure To Recognize DV Camera

Yes to all you said. There is no error indicator under the IEEE 1394 Bus
host controller. Device manager says device is working properly. Cable is
brand new (Belkin).

-------------------------...A cynic does not read bitter lessons from the
past; he is prematurely disappointed in the future...

"LVTravel" <noone@xxxxxxxxxxx> wrote in message
news:u2yn3jU3IHA.1196@xxxxxxxxxxxxxxxxxxxxxxx

"King Harry" <bitterbrush@xxxxxxxxxxxxx> wrote in message
news:C95E83CA-032B-4F11-A27F-3B764D5F50D4@xxxxxxxxxxxxxxxx
For a reason unknown to me, I am unable to import digital video from my
Sony
DCR-PC9. I connect to my PC from The camera via a Firewire (IEEE1394), 6
pin
to 4 pin. I am using WinXpMedia Edition. Keep getting on-screen message
that
the input device cannot be found. Any ideas?

Thanks
--
Against stupidity even the Gods themselves battle in vain.

Lets look at the obvious first. Camera turned on and in playback mode?
Absolutely sure the cable is good and plugged in all the way? Can you see
the Firewire card/adaptor in Device manager under "IEEE 1394 Bus host
controllers" without any error indication (yellow !)?



.

Relevant Pages

  • Re: USB Mass Storage Device (final)
    ... First thing you should check is what name the strata driver has ... been assigned by the device manager. ... 0, bus address 0x00 ... 0x83a87838: UsbFnMdd!UfnMdd_OpenPipe: Opened endpoint 0x2 ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Changing Out PCI Adapter?
    ... The Disk drives are the Atech media reader, and the IEEE 1394 Bus host ... view I'm missing in Device Manager that would simplify this? ... VIA OHCI Compliant IEEE 1394 Host Controller 5.1.2535.0 ...
    (microsoft.public.windowsxp.hardware)
  • RE: XP not recognizing Sony camcorder on new computer (same hardware)
    ... Go to device manager and uninstall the IEEE 1394 adapter and then reboot. ... and have never been able to get Windows XP to recognize my camcorder on ... > to install XP Pro on my new PC. ...
    (microsoft.public.windowsxp.hardware)
  • Re: firewire wont regonise my external hard drives
    ... yep its under there in device manager and it says ... ieee 1394 bus host controllers then under that it says ... it just doesnt see any device that i connect to the ... >It should be under IEEE 1394 Bus Host Controllers. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Printer and USB Port - This device can work faster...
    ... You can disable that error message. ... Just go to device manager and select ... then the device is only working at USB 1 ... The main thing to check is that you do have a USB2 enhanced host controller ...
    (alt.comp.hardware.pc-homebuilt)