Re: Movie Maker lost the abiliy to capture in DV-AVI from a camcor

Graham (or anyone),

Actions tried last night.

1. Uninstalled portions of the Yahoo Toolbar and Windows Live to fix other
problems. Fixed one of the two. Did not test Movie Maker these changes.

2. Registered or reregistered QDV.DLL. One of actions 1 or 2 made the
camera problem worse. Windows stopped recognizing the USB video device when
the camera was plugged in. The device manager no longer had a USB video
device.

3. Checked the date on the last captured AVI against the trial system
restore. The trial system restore was in fact older than this capture.

4. Uninstalled and reinstalled the Panasonic AVI stream driver. This
restored the ability of windows to recognize the USB viceo device. The Movie
Maker problem remained.

5. Checked the camera (Panasonic PV GS180) and computer (Dell Dimension)
for firewire and found none. The camera uses USB2. There is a DV output.
Is DV compatable with Firewire or 1394? Firewire could be added to the
computer with a card and would probably be a low cost option. The camera
manual barely mentions Firewire or IEEE 1394.

6. Reloaded directX from the Panasonic disk. This was suspiciously too
fast and may have done nothing. The Movie Maker problem remained.

This is what I can think of to try next.
a) Try Dell technical support.
b) Remove all Windows Live components.
c) Try unregister of QDV.DLL
d) Retry reinstall of directX.

Ouestions.
What else can youy think of try?
Can the camera DV port be used with a PC 1394 port?
Can Movie Maker be reinstalled? If so How?

--
John Zweighaft


"Graham Hughes" wrote:

Ok, movie maker is not designed to work with USB, it is designed to work
with firewire.
Panasonic produce what is knwn as a USB2 video driver, which gives you the
ability to capture dv.avi files from a mini dv camcorder using usb2. If the
cam is a panasonic mini dv try re-installing the drivers from the supplied
cd.
MM is still not designed to pick up on this driver, but luckliy your son
appears to have a system which has so it may again, or his luck may have run
out and you never see it again.


Why isn't firewire an option?
What cam do you have?


--

Graham Hughes
MVP Digital Media
www.myvideoproblems.com


"John Z" <JohnZ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:F2BD99D3-B86E-4DD3-8B0F-909286D159F1@xxxxxxxxxxxxxxxx
Graham,

I probably lost a longer post, but it may appear. My apologies if this is
a
repeat.

In short, USB can work. My son in-law has produced excellent quality DVDs
using Movie Maker to capture and edit video from his camcorder. Neither
the
computer nor the camcorder have firewire.

I suspect some software change and will continue looking.

I have not tried reinstalling camera software or Movie Maker. I don't see
how to reinstall Movie Maker either. Do you know how?

I'm open to suggestions, but firewire is not a viable option on his
system.

--
John Zweighaft


"Graham Hughes" wrote:

Your problem is the USB connection.

You need to connect via firewire.

What cam do you have?

--

Graham Hughes
MVP Digital Media
www.myvideoproblems.com


"John Z" <JohnZ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2CDA419E-FF38-40D5-BC45-641BAFE6F51E@xxxxxxxxxxxxxxxx
Thanks. That's a good trouble shooting suggestion. I did notice the
WMV
option was available. I started capture in at least one other format,
it
might have been WMV, but aborted before completion. I should have
completed
a capture in any other format. I'll try a short WMV clip and reply
with
results.

It may be a day or two until I try. I'm helping my son in-law. He
prefers
the AVI format for creating good DVDs of my grandson. I really want to
get
AVI capture back. If I fail I might look for another video editing
program
for him.

Note that the camera uses a USB connection. Movie Maker recognizes (at
least partially) that the camera is connected, but would not let me set
capture parameters and forced 320x240 and 15 frames per second.


--
John Zweighaft


"John Z" wrote:

Windows Movie Maker has lost the ability to capture video from a DV
camcorder
in DV-AVI format. The DV-AVI selection is now grayed out and not
available.
It worked when last used about 1 month ago.

Rebooting windows does not help. Windows automatic update is on.
Movie
maker automatic codec download was off. I turned on automatic codec
download
and imported an AVI video file on the computer without fixing the
problem
although from the wait before starting the import I suspect a new
codec
was
loaded.

The operating system version is Windows XP Home Edition Version 5.1
service
pack 2. Movie Maker is version 2.1.

How do I restore the ablilty to capture camera video in DV-AVI format?

--
John Zweighaft






.