Re: Audio Problems
- From: "Wojo" <[REMOVE]wojos_web@[REMOVE]verizon.net>
- Date: Fri, 13 Jan 2006 02:12:52 GMT
Oh man, so now your bald and have no finger nails?
:)
"dickmr" <dickmr@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6D5BACF5-7C01-4410-AC43-B907464680D4@xxxxxxxxxxxxxxxx
>I have the Dazzle 80, and it is very good. Choose the 'mic in' option and
> the sound will be ok. I know this because I spent about two hours of
> pulling out all my hair, and when that was gone, biting on my nails!
> Analog is analog and it won't be digital quality, but in Movie Maker use
> the
> 'brighten' and 'contrast' effects to improve it. Good luck!
>
> "Wojo" wrote:
>
>> This is happening because Movie Maker was not designed to capture analog
>> signals. It was designed and works best with firewire but you do have
>> some
>> options.
>> You can capture using the Conexant software or you can purchase a digital
>> pass-through unit such as the Dazzle80. With this unit you hook the
>> analog
>> camera up to the dazzle using your analog cables and the dazzle is hooked
>> to
>> a USB port on your computer. This way Movie Maker is actually capturing a
>> digital signal instead of analog and should work. Don't ask me why using
>> USB
>> this way works but hooking a digital camera direct to USB usually doesn't
>> because I have no idea I just know it to be true.
>> -Wojo
>> --
>> Wojo's Web:
>> http://www.remember-christopher.dostweb.com/Wojos_web/
>> Also Please visit.....
>> http://www.remember-christopher.dostweb.com/christopher/
>>
>>
>> "Agent_Meg" <AgentMeg@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:3B3FEE1A-F464-48F1-A581-B3BC71F7C30A@xxxxxxxxxxxxxxxx
>> >I have an analog video camera. I plugged in all the wires properly, but
>> >when
>> > I go to capture video, there is only video, no sound.
>> >
>> > In the pull down menu for audio devices, there are two options: Realtek
>> > AC97
>> > Audio, and Conexant Falcon Audio Capture. With the Realtek AC97 Audio
>> > option,
>> > I can select the audio input source, such as Line In, Line In 2, Mono
>> > mix,
>> > ect. I've tried all these options and none of them produce audio.
>> >
>> > The video capture device is called Conexant Falcon II NTSC Video
>> > Capture,
>> > so
>> > it would make sense that the audio device would be Conexant Falcon
>> > Audio
>> > Capture.
>> >
>> > When I select Conexant Falcon Audio Capture, no options for audio input
>> > source are given. But on the screen before the video capture, when I
>> > click
>> > next the screen freezes and will do nothing. As soon as a click around
>> > a
>> > few
>> > times, it says Not Responding and I have to Ctrl Alt Delete out of the
>> > program. I've tried doing this multiple times, and have rest the
>> > computer,
>> > but it keeps happening.
>> >
>> > I'm extremley frustrated, what should I do?!
>> >
>>
>>
>>
.
- Follow-Ups:
- Re: Audio Problems
- From: dickmr
- Re: Audio Problems
- References:
- Re: Audio Problems
- From: Wojo
- Re: Audio Problems
- Prev by Date: Re: Can't play back Movie Maker CD
- Next by Date: Re: No picture in storyboard
- Previous by thread: Re: Audio Problems
- Next by thread: Re: Audio Problems
- Index(es):
Relevant Pages
|
