RE: Video is in use
From: Michael Tr (MichaelTr_at_discussions.microsoft.com)
Date: 02/28/05
- Next message: Michael Tr: "RE: Video from VCR produces a WMM video device in use error"
- Previous message: John Kelly: "Re: Nero out of sync"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 28 Feb 2005 00:43:07 -0800
I received the following reply fom HP on a similar problem. I hope it helps
you:
Thank you for contacting HP Total Care.
I understand from your mail that you want to copy a VCR tape to DVD using
the media center tv tunner and Windows Movie Maker. As the VCR is in the
analog format and the later on which you want to copy will be in digital
format so this is not possible.
Further I would like to say that If you already have a FireWire (IEEE
1394) port on your PC and a DV camcorder, you can connect a VCR deck to your
camcorder (with phono and mini-jack connectors). You can then transfer your
analog material to digital format in the camcorder, and capture this footage
via the FireWire cable into your PC using muvee autoProducer. If you don't
have a FireWire port, you'll have to capture the analog material and convert
it into a digital format your PC.
One option is to install a PCI capture card into your PC -- one that accepts
analog video input and converts it to a digital format (DV, MPEG-1, etc). If
you'd prefer not to open up your PC, an external capture/conversion device
that can convert analog video signals from a VHS, Hi-8m or VHS-S camera into
digital files might be a better option.
You might want to note that a conversion device that works with a FireWire
card on your computer works much faster and generally gives you better
quality video than one with a USB port.
I assure that the information provided was helpful and would resolve your
issue. If you have further questions, please reply to this message and we
will be happy to help you.
Sincerely,
Peter
HP Total Care
Our advice is strictly limited to the question(s) asked and is based on the
information provided to us. HP does not assume any responsibility or
liability for the advice given and shall not be liable for any direct,
indirect, special, incidental or consequential damages in connection with the
use of this information. Always back up your data.
For more information, including technical information updates, please visit
our Web site at http://www.hp.com/support.
"LH1" wrote:
> When i try to capture video to moviemaker2 errorpopup says
> the videounit is in use now
> please close all other programs that uses the
> videounit and try again
> i push ok
> and a new popup says
> its not possible to use the videounit right now
> because there was an error when the unit was started
> and of course there is no other programs started that should use the
> video
> ATI allinwonder pro agp
> Please Help.
>
>
- Next message: Michael Tr: "RE: Video from VCR produces a WMM video device in use error"
- Previous message: John Kelly: "Re: Nero out of sync"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
