IM 4.5 and auto-signin

I am running IM 4.7(4.7.3000) and I enable the auto-signin checkmark, but
when I boot up the system and log into the AD, I am not automatically signed
on...? when I manually signin, it works fine.

This is happening to 2 of 10 IM PCs and I don't know why.

Any ideas...?

thanks, Tom...


.

Relevant Pages

  • Re: The Windows XP Pro experience ....
    ... >> enough about PCs to get the details right. ... >> boot because its motherboard battery had died. ... >> boot just fine with a dead battery. ... Its not an attack on Macs. ...
    (comp.sys.mac.advocacy)
  • Re: Need to integrate NIC w/ Power
    ... These Dimension 4700 PCs are going to be used in an upcoming museum ... to boot from the Magic Packet utility. ... the lights turn on to indicate the NIC has power. ...
    (alt.sys.pc-clone.dell)
  • Re: Weird error with ram boot
    ... different PCs wtih different processors and chipsets - is this correct? ... I have a 256MB SDI image and put it on a server for PXE boot using Remote ... It works fine with most PCs (>= 512 MB Ram). ... If I boot the image into the Debugging Mode, ...
    (microsoft.public.windowsxp.embedded)
  • Are SATA drives less resilient to file-system corruption than IDE?
    ... Over the past couple of months I've been called to three customers whose PCs ... corrects a few filesystem errors and leaves the disk in a state where it ... will boot the original PC perfectly. ... factor is a mains blip or power-cut: in one case something fell on the mains ...
    (uk.comp.misc)
  • Re: Weird error with ram boot
    ... different PCs wtih different processors and chipsets - is this correct? ... I have a 256MB SDI image and put it on a server for PXE boot using Remote ... types of motherboard, after the image was loaded from the server to the ...
    (microsoft.public.windowsxp.embedded)