Re: SIP Password

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

The draytek site is where I got the how I can do all you say in regards to
changeing the setting in advanced where I added "draytel.org" BUT

If you go to the page you mentioned I dont get anything you see from the line#
"Next, sign into Windows Messenger, using the account details you set up"

So no password option!

Also when you press start a voice option there is no Communtication Service.
But I have filled in the SIP Communications Service Connection Configuration
just as discribed in that page!

When I do log in to the SIP server is comes back after 60 seconds with a
message.


You have been signed out of SIP Communications Service because that service
has been temporarily shut down. Please try again later.

I feel that it is if the Communications Service is not installed properly as
you confirm I have gone through the actions to set it up correctly.


Simon




"Alexey Korobkin" wrote:

> Hello, Zehety!
>
> You wrote on Fri, 27 Jan 2006 16:01:27 -0800:
>
> Z> Thank you for your reply, I ventured to a part of windows I have not
> Z> seen before so interesting as a reply. But there was no SIP server.
>
> How this could be there is no SIP server? draytel.org is your SIP server, actually.
> Have you seen this link?
> http://www.draytel.org/software_setup.html#winmess
>
> Uncheck the box near .NET passport account, and check it only near SIP communication account.
> There under the Advanced button you'll see your server settings.
>
> Z> So I added draytel.org and the user name and password which insisted on
> Z> being in an
> Z> ????@draytel.org format than just the six digits. But it still cam back
> Z> and said I was not signed in.
>
> Z> As a further clue to you, If I go to actions and ask to start a voice
> Z> conversation then select "Other" and then "Select the service that this
> Z> person uses" I only have a choice of .NET Messenger Service. Is that
> Z> because the service is not loaded or because I am not logged in to the
> Z> SIP?
>
> This means you're logged in .NET/MSN network instead of SIP network.
>
> --
> With best regards, Alexey Korobkin.
>
>
>
.

Relevant Pages

  • Re: SIP Password
    ... > Greetings Simon, ... > break these "hacks" (it's not intended that you use the SIP based support in Windows ... >> But I have filled in the SIP Communications Service Connection Configuration ... >>> How this could be there is no SIP server? ...
    (microsoft.public.windowsxp.messenger)
  • Re: SIP Password
    ... I believe this functionality was changed significantly enough in Windows Messenger 5.1 to ... Messenger as a SIP phone but it used to work). ... > But I have filled in the SIP Communications Service Connection Configuration ... But there was no SIP server. ...
    (microsoft.public.windowsxp.messenger)
  • Re: Although I have an outgoing rule to allow RTP, ISA does not forward the
    ... anybody tried to setup rules with the SIP protocol in Forefront TMG? ... I tried to publish a SIP Server with the predefined "SIP Server" protocol. ... "SIP Access Filter" is checked for that protocol, but it does not work as ...
    (microsoft.public.isa)
  • Re: SIP Access Filter
    ... But have you tried to publish a SIP server? ... Forefront TMG server, but it also replaces external addresses with the local ... The SIP Access Filter changes incoming packets the following way: ...
    (microsoft.public.isa)
  • Re: SIP server
    ... I was just wanting something really simple right now... ... handle registration of phones and to allow lookup of other phones and ... > SIP Proxy ... >> I am trying to develop a SIP server. ...
    (microsoft.public.dotnet.languages.vb)