Re: SP3 Installation Not There

Follow the instructions here, Kaderin:

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01457284

After you do so, you may apply the patch from here:

http://h10025.www1.hp.com:80/ewfrf/wc/genericSoftwareDownloadIndex?lc=en&dlc=en&cc=us&softwareitem=pv-60484-2

(Actually, there is a download link to the same patch in the first link,
too.)


Kaderin wrote:
Sorry, I have a Compaq Pesario, with an AMD processor.

"Shenan Stanley" wrote:

Kaderin wrote:
I have installed SP3 numerous times, each times the computer
restarts itself after installation I get noting. Just a black
screen w/ a cursor. I have been though help and support, read many
articles. I have done everything that any site I have visited has
told me to. I have to Ctrl-Alt-Del to restart and enter System
Recovery Mode to do a restore to an earlier point. Is there
anything else I can do?

Clarify which SP3 you mean. I could assume all sorts of things
based off where you posted, etc - and will - but you should really
provide that basic information in the future.

Assuming you mean SP3 for Windows XP...

Let's walk through installing Windows XP SP3 and
properly preparing your PC for it:

First - before anything else - answer this:

Do you have an HP branded computer with an AMD processor?
(If so - answer and wait. If not, answer and continue witht he
steps.)

Fix your file/registry permissions...

Ignore the title and follow the sub-section under "Advanced
Troubleshooting" titled, "Method 1: Reset the registry and the file
permissions" http://support.microsoft.com/kb/949377
*will take time
(** Ignore the last step - you'll install SP3 shortly, but not now.)

Reboot and ...

Download/install this:
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button --> RUN --> type in:
"%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
--> Click OK.
(The quotation marks and percentage signs and spacing should be
exact.)

Download, install, run, update and perform a full scan (separately)
with the following two applications (freeware versions are the ones
to use for this):

SuperAntiSpyware
http://www.superantispyware.com/

MalwareBytes
http://www.malwarebytes.com/

After performing a full scan with one and then the other and removing
whatever they both find completely, you may uninstall these products,
if you wish.

Download and run the MSRT manually:
http://www.microsoft.com/security/malwareremove/default.mspx

Reboot.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

Reboot.

and...

Download the latest version of the Windows Update agent from here
(x86): http://go.microsoft.com/fwlink/?LinkID=91237
.... and save it to the root of your C:\ drive. After saving it to
the root of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button --> RUN and type in:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.

(If asked, select "Run.) --> Click on NEXT --> Select "I agree" and
click on NEXT --> When it finishes installing, click on "Finish"...

Reboot.

Then follow the instructions here:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

Reboot.

Now for SP3...

1) Download the full SP3 installation file.

Windows XP Service Pack 3 Network Installation Package for
IT Professionals and Developers (works just as well for you.)
http://www.microsoft.com/downloads/details.aspx?familyid=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4

You are just saving it right now - not running it yet.

2) Ensure (as well as plausible) you have no spyware/malware by
doing a full scan with SuperAntiSpyware and MalwareBytes. If
you are following along, you have already done this!

3) CHKDSK
How to scan your disks for errors
http://support.microsoft.com/kb/315265
* will take time and a reboot

4) Defragment
How to Defragment your hard drives
http://support.microsoft.com/kb/314848
* will take time

5) Ensure your hardware drivers are up to date (from the hardware
manufacturer's respective web pages.) Never get hardware drivers
for hardware that was not created/sold by Microsoft from
Microsoft.

6) Reboot right before you try to install SP3.

7) Disconnect from the internet before installing (physically
disconnect - pull the network cable or disable the router/modem.)

8) Disable your antivirus and antispyware applications when you are
about to install SP3. Usually right-click on the icon in the
taskbar gives you a choice to do so.

Install SP3 by running the downloaded executable. Reboot when
requested to do so. Logon and let the machine 'settle' for about 10
minutes. Reboot. Give it 5 minutes after logon to 'settle' - reboot.

After that - there will be more updates.

Log on as an user with administrative rights and open Internet
Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web
pages - first press and hold down the CTRL key while you click on
it. You can release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5
at a time. Rebooting as needed.

The Optional Software updates are generally safe - although I
recommend against the "Windows Search" one and any of the "Office
Live" ones or "Windows Live" ones for now. I would completely avoid
the
Optional Hardware updates. Also - I do not see any urgent need to
install Internet Explorer 8 at this time.

Seriously - do all that. This is like antibiotics - don't skip a
single step, don't quit because you think things will be okay now -
go through until the end, until you have done everything given in
the order given. If you have a problem with a step come ask and let
someone here get you through that step. If you don't understand how
to do a step, come back and ask here about that step and let someone
walk you through it.

Then - when done - let everyone here know if it worked for you - or
if you have more issues.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html


.

Loading