Re: damaged XP/boot to dos prompt

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



On Aug 24, 3:35 pm, "geekdna" <dkill...@xxxxxxxxxx> wrote:
Still messing w/damaged XP OS. (original post below) Can boot to safe mode
w/dos prompt, but many of the commands I'm used to aren't there (fixboot,
bootcfg, map) are there any comparable? I can't get /p to work when I type
help, so can't see many of the commands available. Is there some other
command I can use? Then I can at least see the commands and try to figure
out if one of them can help me.
Still no cd rom available. c:\dir reveals a config.sys with nothing in it..
Is there something I can type in there to get more of my system to work?
When I did a c:\config.sys, windows asked me what program to run & allowed
me to open notepad to view it. Can I use this option to my advantage for
more recovery purposes? I'm hoping...

Needed to repair my XP SP2 OS but the disks I thought were the right ones
weren't. It iwas a different OEM version and I don't have a product key,
so
can't boot up. Now that I have found the correct recovery disks for my
system, the F10 recovery option is not available while starting. I can get
into BIOS and CMOS and even boot to safe mode w/prompt, but I can't get it
to boot from CD, even tho it says it's doing so. When at the command
prompt,
I can't get an alternate drive to come up, even tho the CD rom drive shows
up in the BIOS. A flash drive isn't recognized, either.

I can't help but think it should be an easy fix, but I don't know how to
go
about it.

--
Donna
404 Westover Dr.
Yakima, WA 98908
509.494.3015 c
509.249.8836 fx
509.249.0080 w

You are doing it wrong! Fixboot and Bootcfg are not directly
installed on to the hard drive. These are part of the Recovery
Console which is usually found when booting a true XP install CD (not
the recovery CDs.)

Also, there are some web sites that offer methods on installing the
Recovery Console onto the hard drive. This will add a boot option.
.



Relevant Pages

  • Re: XP Problem, Please Help--
    ... says that I can try to fix the file using recovery, ... "Boot Using Last Known Good Configuration". ... Boot your system with the Windows XP Install CD, ... type in the following commands with pressing Enter after each ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: XP Problem, Please Help--
    ... says that I can try to fix the file using recovery, ... "Boot Using Last Known Good Configuration". ... Boot your system with the Windows XP Install CD, ... type in the following commands with pressing Enter after each ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: XP Problem, Please Help--
    ... It involved copying files while in recovery mode ... Select "Boot Using ... It will now attempt to load Windows XP using a past set of configuration ... type in the following commands with pressing Enter after each line. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: damaged XP/boot to dos prompt
    ... you can boot with any winxp and select repair. ... w/dos prompt, but many of the commands I'm used to aren't there are there any comparable? ... Can I use this option to my advantage for more recovery purposes? ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: On "Recovery Time Limit" (TLER-like)
    ... See "SCT Error Recovery Control" in section 8.3.4. ... To confirm whether ERC is supported by the drive, ... Set supported) of word 206 in the Identify ... The ERC commands can be "tunnelled" inside SMART READ LOG and SMART ...
    (comp.sys.ibm.pc.hardware.storage)