Re: No Sound Recorder

Thanks for all your input and work on this Bill. My replies and comments
follow each of yours below.

"Bill in Co." <not_really_here@xxxxxxxxxxxxx> wrote in message
news:%230KtUJWQJHA.1148@xxxxxxxxxxxxxxxxxxxxxxx
Lorraine W wrote:
Thanks for the input Bill & Philo, but before I didn't need ANYTHING to
be
able to play the tapes through the computer just using an RCA to 3.5MM
Stereo Mini (Y cable).

Right - you don't need Sound Recorder for that. (but the fact that it was
missing from Accessories is also somewhat puzzling, but may be just
coincidental)

The sound recorder works (even though missing from the programs menu) as it
recorded the audio test I did by creating a loop following these
instructions rec'd from the tech where the computer was manufactured.:
--------------------------------
"To Test Sound Card Line-In Jack Using Audio Loopback (RealTek):

This technique will cause the computer to record signal emitted from the
speaker output.

1. Use a double-ended mini-DIN 8mm headphone cable.
2. Connect one end of the cable to the speaker output jack (lime)
3. Connect the other end of the cable to the line-in jack (blue)
4. Go to the Control Panel and start the Sound and Audio Devices applet.
5. In the Device Volume section, click on "Advanced"
6. Go to the Options menu, then Properties menu item
7. Choose "Realtek HD Audio Input" from the Mixer device list
8. Place a checkmark in the Recording Control, CD Volume, Line Volume,
and Mic Volume items
9. Click Ok
10. In the Recording Control, ensure the Recording volume is high, and
that all controls are UNmuted
11. Go to Start>All Programs>Accessories>Entertainment>Sound Recorder
(or enter %systemroot%\system32\sndrec32.exe in Start>Run box)
12. Open the RealTek Audio I/O Control (double-click on the brown
speaker icon in the task tray next to the clock, or go to the RealTek HD
Sound Effect Manager in the Control Panel)
13. Click on the Audio I/O tab and ensure that the Line-In (blue) and
Speaker Out (green) indicators are lit up. If they are not, you may
have a cable problem.
14. Go to the 3D Audio Demo tab
15. Click on the play button at the lower right
16. In the Sound Recorder tool started in step 11, click on the record
button (red dot)
17. If you see a stream of waveforms, your line-in jack are working
correctly and receiving signal from output. If not, there may be a
driver issue or the jack is malfunctioning."
-----------------------------------
Everything worked as it should, and I saw the wave forms.

I have Roxio Media Creator 10 for recording, but when I try to set that
up
for recording, there is nothing in the drop down box for "Capture from"
or
"line in".

But that might be an issue with Roxio Media Creator and not your
computer's
sound controller (not sure). (I don't have Roxio Media Creator, but I do
have its predecessor, EZCD (Easy CD Creator), and some other audio apps).
More below....

I don't think so, as it wouldn't work even before I installed Roxio.


The tape deck plays fine through a receiver,

I assume here you are talking about a direct connection between the Line
Out
of the tape deck to the Auxilliary (or whatever) inputs of the receiver,
without the computer being involved. So we know the issue is either
with
Roxio or the computer's audio system.

Yes to the first sentence. I think the issue is most likely Windows. On
my old computer I copied tracks from about 5 or 6 cassette tapes with no
problem. Then life got in the way, and I didn't get back to the task for
many months. Then it wouldn't work. I know that I had issues with the
audio control interface (for the intel motherboard with integrated sound)
after some Microsoft updates. Intel helped me sort that out, but I didn't
think then to check out the line in problem.

Does your computer sound work on any sounds? Say like booting up, or
playing any existing music files, in WMP? But I'm guessing it does.

All sounds (except from the line in) work just fine - video files, wma
files, mp3 files and computer sounds.

the line in on the motherboard
is OK, but the computer just doesn't want to "hear it".

Any other suggestions?

How do you know for a fact that the Line Input on the motherboard's sound
controller is working ok? See, if I recall, you haven't been able to get
any sound on your computer while using its Line Inputs.

See above.



~~~~~~~~~~~~~~~~~~~~~~~~~~~~


"Lorraine W" <lwilki-nospam@xxxxxxxxx> wrote in message
news:uoyS1LSQJHA.728@xxxxxxxxxxxxxxxxxxxxxxx
Thanks Bill. I did that, and got the shortcut in the menu, but my tape
deck still isn't being "heard".

Lorraine
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

"Bill in Co." <not_really_here@xxxxxxxxxxxxx> wrote in message
news:OgZk0gRQJHA.4992@xxxxxxxxxxxxxxxxxxxxxxx
I don't know how much help this will be, but I believe the sound
recorder
file is located here: \windows\system32\sndrec32.exe. You could
create
a shortcut to it there, and then move the shortcut into the Accessories
Menu, and perhaps get Sound Recorder back again that way (assuming that
sndrec32.exe file is still on your HD, which I bet it is).

Lorraine W wrote:
I'm trying to transfer cassette tape files to my computer so I can
re-record to CDs.

I'm running XP Pro SP2 (OEM), and have built in 7.1 channel HD audio
built
into the ASUS motherboard (custom built computer). When I go to start
all
programs> accessories> entertainment, the only thing listed is Windows
Media
Player. There is no sound recorder as there was on my old computer.

I tried to install it by clicking on "Add/remove Windows Components",
but
there was no "Entertainment Category". It didn't matter whether I did
this
from the control panel or from the Windows install screen from the OEM
disc.
I tried reinstalling the "Accessories and Utilities" but that didn't
help -
still no sound recorder.

I also checked the OEM disc from my old computer (which my hubby has)
and it
didn't have the "entertainment" category either, but the sound
recorder
is shown in the all programs> accessories> entertainment category.
I'm
pretty sure it was always there, meaning I didn't install it later.

I checked the line in on the back of the computer by creating a loop
and
it is active and working properly.

I'm wondering if this could be a problem arising from a Windows
Update?
I tried my old computer and it now doesn't recognize the line in or
the
tape deck. It was fine when I first did this, but I only got a few of
my
tapes transferred. Not sure when it stopped working though.

Can anyone please help me to fix this?

Lorraine
~~~~~~~~~~~~~~~~~~~~~~~~~~~~




.